hoo2/STM32F10x_Std_Lib
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Init commit of bundled StdPeriph-CMSIS library

Browse Source
This commit is contained in:
hoo2
2020-11-13 12:56:29 +02:00
commit c21da4388c
492 changed files with 331315 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
CMSIS/Device/ST/STM32F10x/Include/stm32f10x.h
+8336
View File
File diff suppressed because it is too large Load Diff
CMSIS/Device/ST/STM32F10x/Include/system_stm32f10x.h
+102
View File
@@ -0,0 +1,102 @@
/*
system_stm32f10x.h - This provides system clock functions and an exported
variable for System init and clock configuration.
includes:
SystemInit, SystemCoreClockUpdate,
Copyright (C) 2011 Houtouridis Christos (http://houtouridis.blogspot.com/)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Author: Houtouridis Christos <houtouridis.ch@gmail.com>
Date: 11/2011
Version: 0.1
*/
#ifndef __stm32f10x_system_h__
#define __stm32f10x_system_h__
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32f10x.h"
/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
frequency (after reset the HSI is used as SYSCLK source)
IMPORTANT NOTE:
==============
1. After each device reset the HSI is used as System clock source.
2. Please make sure that the selected System clock doesn't exceed your device's
maximum frequency.
3. If none of the define below is enabled, the HSI is used as System clock
source.
4. The System clock configuration functions provided within this file assume that:
- For Low, Medium and High density Value line devices an external 8MHz
crystal is used to drive the System clock.
- For Low, Medium and High density devices an external 8MHz crystal is
used to drive the System clock.
- For Connectivity line devices an external 25MHz crystal is used to drive
the System clock.
If you are using different crystal you have to adapt those functions accordingly.
*/
#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
/* #define SYSCLK_FREQ_HSE HSE_VALUE */
#define SYSCLK_FREQ_24MHz 24000000
#else
/* #define SYSCLK_FREQ_HSE HSE_VALUE */
/* #define SYSCLK_FREQ_24MHz 24000000 */
/* #define SYSCLK_FREQ_36MHz 36000000 */
/* #define SYSCLK_FREQ_48MHz 48000000 */
/* #define SYSCLK_FREQ_56MHz 56000000 */
#define SYSCLK_FREQ_72MHz 72000000
#endif
/*!< Uncomment the following line if you need to use external SRAM mounted
on STM3210E-EVAL board (STM32 High density and XL-density devices) or on
STM32100E-EVAL board (STM32 High-density value line devices) as data memory */
#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
/* #define DATA_IN_ExtSRAM */
#endif
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
#ifdef __cplusplus
extern
#endif
uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
void SystemInit(void);
void SystemCoreClockUpdate(void);
#ifdef __cplusplus
}
#endif
#endif //#ifndef __stm32f10x_system_h__
CMSIS/Device/ST/STM32F10x/Release_Notes.html
+284
View File
@@ -0,0 +1,284 @@
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<link rel="File-List" href="Library_files/filelist.xml">
<link rel="Edit-Time-Data" href="Library_files/editdata.mso"><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]--><title>Release Notes for STM32F10x CMSIS</title><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>STMicroelectronics</o:LastAuthor> <o:Revision>37</o:Revision> <o:TotalTime>136</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2009-03-01T17:56:00Z</o:LastSaved> <o:Pages>1</o:Pages> <o:Words>522</o:Words> <o:Characters>2977</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>24</o:Lines> <o:Paragraphs>6</o:Paragraphs> <o:CharactersWithSpaces>3493</o:CharactersWithSpaces> <o:Version>11.6568</o:Version> </o:DocumentProperties> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:Zoom>110</w:Zoom> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]-->
<style>
<!--
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{mso-style-parent:"";
margin:0in;
margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:12.0pt;
font-family:"Times New Roman";
mso-fareast-font-family:"Times New Roman";}
h2
{mso-style-next:Normal;
margin-top:12.0pt;
margin-right:0in;
margin-bottom:3.0pt;
margin-left:0in;
mso-pagination:widow-orphan;
page-break-after:avoid;
mso-outline-level:2;
font-size:14.0pt;
font-family:Arial;
font-weight:bold;
font-style:italic;}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;
text-underline:single;}
a:visited, span.MsoHyperlinkFollowed
{color:blue;
text-decoration:underline;
text-underline:single;}
p
{mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
mso-pagination:widow-orphan;
font-size:12.0pt;
font-family:"Times New Roman";
mso-fareast-font-family:"Times New Roman";}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.25in 1.0in 1.25in;
mso-header-margin:.5in;
mso-footer-margin:.5in;
mso-paper-source:0;}
div.Section1
{page:Section1;}
-->
</style><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="5122"/> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext="edit"> <o:idmap v:ext="edit" data="1"/> </o:shapelayout></xml><![endif]--></head>
<body lang="EN-US" link="blue" vlink="blue">
<div class="Section1">
<p class="MsoNormal"><span style="font-family: Arial;"><o:p><br>
</o:p></span></p>
<div align="center">
<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
<tbody>
<tr style="">
<td style="padding: 0cm;" valign="top">
<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
<tbody>
<tr>
<td style="vertical-align: top;"><span style="font-size: 8pt; font-family: Arial; color: blue;"><a href="../../../../../../Release_Notes.html">Back to Release page</a></span></td>
</tr>
<tr style="">
<td style="padding: 1.5pt;">
<h1 style="margin-bottom: 18pt; text-align: center;" align="center"><span style="font-size: 20pt; font-family: Verdana; color: rgb(51, 102, 255);">Release
Notes for STM32F10x CMSIS</span><span style="font-size: 20pt; font-family: Verdana;"><o:p></o:p></span></h1>
<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;">Copyright 2011 STMicroelectronics</span><span style="color: black;"><u1:p></u1:p><o:p></o:p></span></p>
<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;"><img alt="" id="_x0000_i1025" src="../../../../../../_htmresc/logo.bmp" style="border: 0px solid ; width: 86px; height: 65px;"></span><span style="font-size: 10pt;"><o:p></o:p></span></p>
</td>
</tr>
</tbody>
</table>
<p class="MsoNormal"><span style="font-family: Arial; display: none;"><o:p>&nbsp;</o:p></span></p>
<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" width="900">
<tbody>
<tr>
<td style="padding: 0cm;" valign="top">
<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><span style="font-size: 12pt; color: white;">Contents<o:p></o:p></span></h2>
<ol style="margin-top: 0cm;" start="1" type="1">
<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#History">STM32F10x CMSIS
update History</a><o:p></o:p></span></li>
<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#License">License</a><o:p></o:p></span></li>
</ol>
<span style="font-family: &quot;Times New Roman&quot;;"></span>
<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="History"></a><span style="font-size: 12pt; color: white;">STM32F10x CMSIS
update History</span></h2><br>
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 167px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V3.5.0 / 11-March-2011<o:p></o:p></span></h3>
<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
Changes<o:p></o:p></span></u></b></p>
<ul style="margin-top: 0cm;" type="square">
<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">stm32f10x.h
</span>and <span style="font-style: italic;">startup_stm32f10x_hd_vl.s</span> files: remove the FSMC interrupt
definition for STM32F10x High-density Value line devices.<br>
</span></li>
<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">system_stm32f10x.c</span> file&nbsp;provided within the CMSIS folder. <br>
</span></li>
</ul>
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.4.0
- 10/15/2010</span></h3>
<ol>
<li><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b></li>
</ol>
<ul style="margin-top: 0in;" type="disc">
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
for&nbsp;<b>STM32F10x High-density Value line devices</b>.</span></li>
</ul>
<ol start="2">
<li><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b></li>
</ol>
<ul style="margin-top: 0in;" type="disc">
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
</li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update to support High-density Value line devices</span><span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new define <span style="font-style: italic;">STM32F10X_HD_VL</span></span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">RCC, AFIO, FSMC bits definition updated</span></li>
</ul>
<li class="MsoNormal" style="">
<span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">All
STM32 devices definitions are commented by default. User has to select the
appropriate device before starting else an error will be signaled on compile
time.</span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">Add new IRQs definitons inside the IRQn_Type enumeration for STM23 High-density Value line devices.</span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">"<span style="font-weight: bold;">bool</span>" type removed.</span><br>
<span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"></span></li>
</ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
<span style="font-size: 10pt; font-family: Verdana;"></span></li>
<ul>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">"system_stm32f10x.c" </span><span style="font-weight: bold;"></span>moved to to "<span style="font-weight: bold; font-style: italic;">STM32F10x_StdPeriph_Template</span>" directory. This file is also moved to each example directory under "<span style="font-weight: bold; font-style: italic;">STM32F10x_StdPeriph_Examples</span>".</span><br>
<span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"></span></span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit_ExtMemCtl() </span>function: update to support High-density Value line devices.</span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add "<span style="font-style: italic;">VECT_TAB_SRAM</span>" inside "</span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">system_stm32f10x.c</span></span><span style="font-size: 10pt; font-family: Verdana;">"
to select if the user want to place the Vector Table in internal SRAM.
An additional define is also to specify the Vector Table offset "<span style="font-style: italic;">VECT_TAB_OFFSET</span>".<br>
</span></li>
</ul>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS startup files:</span></span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xx.s</span></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add three
startup files for STM32 High-density Value line devices:
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_hd_vl.s</span></span></li></ul>
</ul>
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.3.0
- 04/16/2010</span></h3>
<ol><li><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b></li></ol>
<ul style="margin-top: 0in;" type="disc"><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
for&nbsp;<b>STM32F10x XL-density devices</b>.</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add startup files for TrueSTUDIO toolchain<br></span></li></ul><ol start="2"><li><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b></li></ol>
<ul style="margin-top: 0in;" type="disc"><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
</li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update to support XL-density devices</span><span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new define <span style="font-style: italic;">STM32F10X_XL</span></span></li></ul><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new IRQs for&nbsp;</span><span style="font-size: 10pt; font-family: Verdana;">TIM9..14</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update FLASH_TypeDef structure</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new IP instances TIM9..14</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">RCC, AFIO, DBGMCU bits definition updated</span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Correct IRQs definition for MD-, LD-, MD_VL- and LD_VL-density devices&nbsp;(remove&nbsp;comma "," at the end of enum list)<br></span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
<span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit_ExtMemCtl() </span>function: update to support XL-density devices</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit()</span> function: swap the order of SetSysClock() and SystemInit_ExtMemCtl() functions.&nbsp;</span><span style="font-size: 10pt; font-family: Verdana;"><br>
</span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS startup files:</span><span style="font-weight: bold; font-style: italic;"></span><span style="font-style: italic;"><span style="font-weight: bold;"></span></span></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">add three
startup files for STM32 XL-density&nbsp;devices:
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xl.s</span></span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold;">startup_stm32f10x_md_vl.s</span> for RIDE7: add USART3 IRQ&nbsp;Handler (was missing in&nbsp;previous version)</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add startup files for TrueSTUDIO toolchain</span></li></ul></ul><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;"></span></span>
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.2.0
- 03/01/2010</span></h3>
<ol style="margin-top: 0in;" start="1" type="1">
<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b><i><span style="font-size: 10pt; font-family: Verdana;"></span></i><i><span style="font-size: 10pt;"><o:p></o:p></span></i></li>
</ol>
<ul style="margin-top: 0in;" type="disc">
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS files updated to <span style="font-weight: bold;">CMSIS V1.30</span> release</span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Directory structure updated to be aligned with CMSIS V1.30<br>
</span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
for&nbsp;<b>STM32 Low-density Value line (STM32F100x4/6) and
Medium-density Value line (STM32F100x8/B) devices</b>.&nbsp;</span><span style="font-size: 10pt;"><o:p></o:p></span></li>
</ul>
<ol style="margin-top: 0in;" start="2" type="1">
<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">CMSIS Core Peripheral Access Layer</span></i></b></li></ol>
<ul>
<li><b><i><span style="font-size: 10pt; font-family: Verdana;"></span></i></b><span style="font-size: 10pt; font-family: Verdana;"> Refer to <a href="../../../CMSIS_changes.htm" target="_blank">CMSIS changes</a></span></li>
</ul>
<ol style="margin-top: 0in; list-style-type: decimal;" start="3">
<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b><b><i><span style="font-size: 10pt;"><o:p></o:p></span></i></b></li>
</ol>
<ul style="margin-top: 0in;" type="disc">
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
</li>
<ul>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update
the stm32f10x.h file to support new Value line devices features: CEC
peripheral, new General purpose timers TIM15, TIM16 and TIM17.</span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Peripherals Bits definitions updated to be in line with Value line devices available features.<br>
</span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">HSE_Value,
HSI_Value and HSEStartup_TimeOut changed to upper case: HSE_VALUE,
HSI_VALUE and HSE_STARTUP_TIMEOUT. Old names are kept for legacy
purposes.<br>
</span></li>
</ul>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
<span style="font-size: 10pt; font-family: Verdana;"></span></li>
<ul>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">SystemFrequency variable name changed to SystemCoreClock</span><br>
<span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"></span></span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Default
</span></span><span style="font-size: 10pt; font-family: Verdana;">SystemCoreClock</span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"> is changed to 24MHz when Value line devices are selected and to 72MHz on other devices.</span></span><span style="font-size: 10pt;"><o:p></o:p></span><span style="font-size: 10pt; font-family: Verdana;"> <br>
</span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">All while(1) loop were removed from all clock setting functions. User has to handle the HSE startup failure.<br>
</span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Additional function <span style="font-weight: bold; font-style: italic;">void SystemCoreClockUpdate (void)</span> is provided.<br>
</span></li>
</ul>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Startup files:</span> <span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xx.s</span></span></li>
<ul>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new
startup files for STM32 Low-density Value line devices:
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_ld_vl.s</span></span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new startup
files for STM32 Medium-density Value line devices:
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_md_vl.s</span></span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">SystemInit() function is called from startup file (startup_stm32f10x_xx.s) before to branch to application main.<br>
To reconfigure the default setting of SystemInit() function, refer to system_stm32f10x.c file <br>
</span></li>
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">GNU startup file for Low density devices (startup_stm32f10x_ld.s) is updated to fix compilation errors.<br>
</span></li>
</ul>
</ul>
<ul style="margin-top: 0in;" type="disc">
</ul>
<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="License"></a><span style="font-size: 12pt; color: white;">License<o:p></o:p></span></h2>
<p class="MsoNormal" style="margin: 4.5pt 0cm;"><span style="font-size: 10pt; font-family: Verdana; color: black;">The
enclosed firmware and all the related documentation are not covered by
a License Agreement, if you need such License you can contact your
local STMicroelectronics office.<u1:p></u1:p><o:p></o:p></span></p>
<p class="MsoNormal"><b style=""><span style="font-size: 10pt; font-family: Verdana; color: black;">THE
PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO
SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR
ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY
CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY
CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH
THEIR PRODUCTS. <o:p></o:p></span></b></p>
<p class="MsoNormal"><span style="color: black;"><o:p>&nbsp;</o:p></span></p>
<div class="MsoNormal" style="text-align: center;" align="center"><span style="color: black;">
<hr align="center" size="2" width="100%"></span></div>
<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt; text-align: center;" align="center"><span style="font-size: 10pt; font-family: Verdana; color: black;">For
complete documentation on </span><span style="font-size: 10pt; font-family: Verdana;">STM32(<span style="color: black;">CORTEX M3) 32-Bit Microcontrollers
visit </span><u><span style="color: blue;"><a href="http://www.st.com/stm32" target="_blank">www.st.com/STM32</a></span></u></span><span style="color: black;"><o:p></o:p></span></p>
</td>
</tr>
</tbody>
</table>
<p class="MsoNormal"><span style="font-size: 10pt;"><o:p></o:p></span></p>
</td>
</tr>
</tbody>
</table>
</div>
<p class="MsoNormal"><o:p>&nbsp;</o:p></p>
</div>
</body></html>
CMSIS/Device/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_cl.s
+473
View File
@@ -0,0 +1,473 @@
/**
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Connectivity line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR
* address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word CAN1_TX_IRQHandler
.word CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_IRQHandler
.word TIM1_UP_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word OTG_FS_WKUP_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word UART5_IRQHandler
.word TIM6_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_IRQHandler
.word DMA2_Channel5_IRQHandler
.word ETH_IRQHandler
.word ETH_WKUP_IRQHandler
.word CAN2_TX_IRQHandler
.word CAN2_RX0_IRQHandler
.word CAN2_RX1_IRQHandler
.word CAN2_SCE_IRQHandler
.word OTG_FS_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
STM32F10x Connectivity line Devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak OTG_FS_WKUP_IRQHandler
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_IRQHandler
.thumb_set TIM6_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_IRQHandler
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak CAN2_TX_IRQHandler
.thumb_set CAN2_TX_IRQHandler,Default_Handler
.weak CAN2_RX0_IRQHandler
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
.weak CAN2_RX1_IRQHandler
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
.weak CAN2_SCE_IRQHandler
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler ,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s
+469
View File
@@ -0,0 +1,469 @@
/**
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Configure external SRAM mounted on STM3210E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word USB_HP_CAN1_TX_IRQHandler
.word USB_LP_CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_IRQHandler
.word TIM1_UP_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word USBWakeUp_IRQHandler
.word TIM8_BRK_IRQHandler
.word TIM8_UP_IRQHandler
.word TIM8_TRG_COM_IRQHandler
.word TIM8_CC_IRQHandler
.word ADC3_IRQHandler
.word FSMC_IRQHandler
.word SDIO_IRQHandler
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word UART5_IRQHandler
.word TIM6_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_5_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
STM32F10x High Density devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak USB_HP_CAN1_TX_IRQHandler
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
.weak USB_LP_CAN1_RX0_IRQHandler
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
.weak TIM8_BRK_IRQHandler
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
.weak TIM8_UP_IRQHandler
.thumb_set TIM8_UP_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_IRQHandler
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak SDIO_IRQHandler
.thumb_set SDIO_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_IRQHandler
.thumb_set TIM6_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s
+451
View File
@@ -0,0 +1,451 @@
/**
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Value Line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Configure external SRAM mounted on STM32100E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_TIM17_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word CEC_IRQHandler
.word TIM12_IRQHandler
.word TIM13_IRQHandler
.word TIM14_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word UART5_IRQHandler
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_5_IRQHandler
.word DMA2_Channel5_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
STM32F10x High Density Value line devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM17_IRQHandler
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak TIM12_IRQHandler
.thumb_set TIM12_IRQHandler,Default_Handler
.weak TIM13_IRQHandler
.thumb_set TIM13_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s
+347
View File
@@ -0,0 +1,347 @@
/**
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word USB_HP_CAN1_TX_IRQHandler
.word USB_LP_CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_IRQHandler
.word TIM1_UP_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word 0
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word 0
.word 0
.word SPI1_IRQHandler
.word 0
.word USART1_IRQHandler
.word USART2_IRQHandler
.word 0
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word USBWakeUp_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x108. This is for boot in RAM mode for
STM32F10x Low Density devices.*/
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak USB_HP_CAN1_TX_IRQHandler
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
.weak USB_LP_CAN1_RX0_IRQHandler
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.c
+272
View File
@@ -0,0 +1,272 @@
/**
******************************************************************************
* @file startup_stm32f10x_ld_vl.c
* @author Coocox
* @version V1.0
* @date 3/4/2011
* @brief STM32F10x Low Density Value Line Devices Startup code.
* This module performs:
* - Set the initial SP
* - Set the vector table entries with the exceptions ISR address
* - Initialize data and bss
* - Setup the microcontroller system.
* - Call the application's entry point.
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
*/
/*----------Macro definition--------------------------------------------------*/
#define WEAK __attribute__ ((weak))
/*----------Declaration of the default fault handlers-------------------------*/
/* System exception vector handler */
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_TIM15_IRQHandler(void);
void WEAK TIM1_UP_TIM16_IRQHandler(void);
void WEAK TIM1_TRG_COM_TIM17_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK CEC_IRQHandler(void);
void WEAK TIM6_DAC_IRQHandler(void);
void WEAK TIM7_IRQHandler(void);
/*----------Symbols defined in linker script----------------------------------*/
extern unsigned long _sidata; /*!< Start address for the initialization
values of the .data section. */
extern unsigned long _sdata; /*!< Start address for the .data section */
extern unsigned long _edata; /*!< End address for the .data section */
extern unsigned long _sbss; /*!< Start address for the .bss section */
extern unsigned long _ebss; /*!< End address for the .bss section */
extern unsigned long _estack; /*!< End address for ram */
/*----------Function prototypes-----------------------------------------------*/
extern int main(void); /*!< The entry point for the application. */
extern void SystemInit(void); /*!< Setup the microcontroller system(CMSIS) */
void Default_Reset_Handler(void); /*!< Default reset handler */
static void Default_Handler(void); /*!< Default exception handler */
/**
*@brief The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x00000000.
*/
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{
/*----------Core Exceptions-------------------------------------------------*/
(void *)&_estack, /*!< The initial stack pointer at end of RAM */
Reset_Handler, /*!< Reset Handler */
NMI_Handler, /*!< NMI Handler */
HardFault_Handler, /*!< Hard Fault Handler */
MemManage_Handler, /*!< MPU Fault Handler */
BusFault_Handler, /*!< Bus Fault Handler */
UsageFault_Handler, /*!< Usage Fault Handler */
0,0,0,0, /*!< Reserved */
SVC_Handler, /*!< SVCall Handler */
DebugMon_Handler, /*!< Debug Monitor Handler */
0, /*!< Reserved */
PendSV_Handler, /*!< PendSV Handler */
SysTick_Handler, /*!< SysTick Handler */
/*----------External Exceptions---------------------------------------------*/
WWDG_IRQHandler, /*!< 0: Window Watchdog */
PVD_IRQHandler, /*!< 1: PVD through EXTI Line detect */
TAMPER_IRQHandler, /*!< 2: Tamper */
RTC_IRQHandler, /*!< 3: RTC */
FLASH_IRQHandler, /*!< 4: Flash */
RCC_IRQHandler, /*!< 5: RCC */
EXTI0_IRQHandler, /*!< 6: EXTI Line 0 */
EXTI1_IRQHandler, /*!< 7: EXTI Line 1 */
EXTI2_IRQHandler, /*!< 8: EXTI Line 2 */
EXTI3_IRQHandler, /*!< 9: EXTI Line 3 */
EXTI4_IRQHandler, /*!< 10: EXTI Line 4 */
DMA1_Channel1_IRQHandler, /*!< 11: DMA1 Channel 1 */
DMA1_Channel2_IRQHandler, /*!< 12: DMA1 Channel 2 */
DMA1_Channel3_IRQHandler, /*!< 13: DMA1 Channel 3 */
DMA1_Channel4_IRQHandler, /*!< 14: DMA1 Channel 4 */
DMA1_Channel5_IRQHandler, /*!< 15: DMA1 Channel 5 */
DMA1_Channel6_IRQHandler, /*!< 16: DMA1 Channel 6 */
DMA1_Channel7_IRQHandler, /*!< 17: DMA1 Channel 7 */
ADC1_IRQHandler, /*!< 18: ADC1 */
0, /*!< 19: USB High Priority or CAN1 TX */
0, /*!< 20: USB Low Priority or CAN1 RX0 */
0, /*!< 21: CAN1 RX1 */
0, /*!< 22: CAN1 SCE */
EXTI9_5_IRQHandler, /*!< 23: EXTI Line 9..5 */
TIM1_BRK_TIM15_IRQHandler, /*!< 24: TIM1 Break and TIM15 */
TIM1_UP_TIM16_IRQHandler, /*!< 25: TIM1 Update and TIM16 */
TIM1_TRG_COM_TIM17_IRQHandler,/*!< 26: TIM1 Trigger and Commutation and TIM17 */
TIM1_CC_IRQHandler, /*!< 27: TIM1 Capture Compare */
TIM2_IRQHandler, /*!< 28: TIM2 */
TIM3_IRQHandler, /*!< 29: TIM3 */
0, /*!< 30: Reserved */
I2C1_EV_IRQHandler, /*!< 31: I2C1 Event */
I2C1_ER_IRQHandler, /*!< 32: I2C1 Error */
0, /*!< 33: Reserved */
0, /*!< 34: Reserved */
SPI1_IRQHandler, /*!< 35: SPI1 */
0, /*!< 36: Reserved */
USART1_IRQHandler, /*!< 37: USART1 */
USART2_IRQHandler, /*!< 38: USART2 */
0, /*!< 39: Reserved */
EXTI15_10_IRQHandler, /*!< 40: EXTI Line 15..10 */
RTCAlarm_IRQHandler, /*!< 41: RTC Alarm through EXTI Line */
CEC_IRQHandler, /*!< 42: HDMI-CEC */
0,0,0,0,0,0, /*!< Reserved */
0,0,0,0,0, /*!< Reserved */
TIM6_DAC_IRQHandler, /*!< 54: TIM6 and DAC underrun */
TIM7_IRQHandler, /*!< 55: TIM7 */
(void *)0xF108F85F /*!< Boot in RAM mode */
};
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
void Default_Reset_Handler(void)
{
/* Initialize data and bss */
unsigned long *pulSrc, *pulDest;
/* Copy the data segment initializers from flash to SRAM */
pulSrc = &_sidata;
for(pulDest = &_sdata; pulDest < &_edata; )
{
*(pulDest++) = *(pulSrc++);
}
/* Zero fill the bss segment. This is done with inline assembly since this
will clear the value of pulDest if it is not kept in a register. */
__asm(" ldr r0, =_sbss\n"
" ldr r1, =_ebss\n"
" mov r2, #0\n"
" .thumb_func\n"
" zero_loop:\n"
" cmp r0, r1\n"
" it lt\n"
" strlt r2, [r0], #4\n"
" blt zero_loop");
/* Setup the microcontroller system. */
SystemInit();
/* Call the application's entry point.*/
main();
}
/**
*@brief Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*/
#pragma weak Reset_Handler = Default_Reset_Handler
#pragma weak NMI_Handler = Default_Handler
#pragma weak HardFault_Handler = Default_Handler
#pragma weak MemManage_Handler = Default_Handler
#pragma weak BusFault_Handler = Default_Handler
#pragma weak UsageFault_Handler = Default_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_TIM15_IRQHandler = Default_Handler
#pragma weak TIM1_UP_TIM16_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_TIM17_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak CEC_IRQHandler = Default_Handler
#pragma weak TIM6_DAC_IRQHandler = Default_Handler
#pragma weak TIM7_IRQHandler = Default_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop,
* preserving the system state for examination by a debugger.
* @param None
* @retval None
*/
static void Default_Handler(void)
{
/* Go into an infinite loop. */
while (1)
{
}
}
/*********************** (C) COPYRIGHT 2011 Coocox ************END OF FILE*****/
CMSIS/Device/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s
+392
View File
@@ -0,0 +1,392 @@
/**
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Value Line Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_TIM17_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word 0
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word 0
.word 0
.word SPI1_IRQHandler
.word 0
.word USART1_IRQHandler
.word USART2_IRQHandler
.word 0
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word CEC_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x01CC. This is for boot in RAM mode for
STM32F10x Medium Value Line Density devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM17_IRQHandler
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s
+363
View File
@@ -0,0 +1,363 @@
/**
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Devices vector table for Atollic toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word USB_HP_CAN1_TX_IRQHandler
.word USB_LP_CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_IRQHandler
.word TIM1_UP_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word USBWakeUp_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x108. This is for boot in RAM mode for
STM32F10x Medium Density devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak USB_HP_CAN1_TX_IRQHandler
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
.weak USB_LP_CAN1_RX0_IRQHandler
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s
+415
View File
@@ -0,0 +1,415 @@
/**
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.6.1
* @date 09-March-2012
* @brief STM32F10x Medium Density Value Line Devices vector table for Atollic
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* Atollic update: set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
/* bl __libc_init_array */
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_TIM17_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word CEC_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x01CC. This is for boot in RAM mode for
STM32F10x Medium Value Line Density devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM17_IRQHandler
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s
+467
View File
@@ -0,0 +1,467 @@
/**
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x XL-Density Devices vector table for TrueSTUDIO toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word USB_HP_CAN1_TX_IRQHandler
.word USB_LP_CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM9_IRQHandler
.word TIM1_UP_TIM10_IRQHandler
.word TIM1_TRG_COM_TIM11_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word USBWakeUp_IRQHandler
.word TIM8_BRK_TIM12_IRQHandler
.word TIM8_UP_TIM13_IRQHandler
.word TIM8_TRG_COM_TIM14_IRQHandler
.word TIM8_CC_IRQHandler
.word ADC3_IRQHandler
.word FSMC_IRQHandler
.word SDIO_IRQHandler
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word UART5_IRQHandler
.word TIM6_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_5_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
STM32F10x XL-Density devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak USB_HP_CAN1_TX_IRQHandler
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
.weak USB_LP_CAN1_RX0_IRQHandler
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM9_IRQHandler
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
.weak TIM1_UP_TIM10_IRQHandler
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM11_IRQHandler
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak SDIO_IRQHandler
.thumb_set SDIO_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_IRQHandler
.thumb_set TIM6_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s
+368
View File
@@ -0,0 +1,368 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_cl.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Connectivity line devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Configure the clock system
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
DCD CAN1_TX_IRQHandler ; CAN1 TX
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C1 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_IRQHandler ; TIM6
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
DCD ETH_IRQHandler ; Ethernet
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
DCD CAN2_TX_IRQHandler ; CAN2 TX
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
DCD OTG_FS_IRQHandler ; USB OTG FS
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT CAN1_TX_IRQHandler [WEAK]
EXPORT CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTCAlarm_IRQHandler [WEAK]
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
EXPORT ETH_IRQHandler [WEAK]
EXPORT ETH_WKUP_IRQHandler [WEAK]
EXPORT CAN2_TX_IRQHandler [WEAK]
EXPORT CAN2_RX0_IRQHandler [WEAK]
EXPORT CAN2_RX1_IRQHandler [WEAK]
EXPORT CAN2_SCE_IRQHandler [WEAK]
EXPORT OTG_FS_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_2_IRQHandler
CAN1_TX_IRQHandler
CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTCAlarm_IRQHandler
OTG_FS_WKUP_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_IRQHandler
TIM7_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_IRQHandler
DMA2_Channel5_IRQHandler
ETH_IRQHandler
ETH_WKUP_IRQHandler
CAN2_TX_IRQHandler
CAN2_RX0_IRQHandler
CAN2_RX1_IRQHandler
CAN2_SCE_IRQHandler
OTG_FS_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
CMSIS/Device/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s
+358
View File
@@ -0,0 +1,358 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Configure the clock system and also configure the external
;* SRAM mounted on STM3210E-EVAL board to be used as data
;* memory (optional, to be enabled by user)
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
DCD TIM8_BRK_IRQHandler ; TIM8 Break
DCD TIM8_UP_IRQHandler ; TIM8 Update
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
DCD ADC3_IRQHandler ; ADC3
DCD FSMC_IRQHandler ; FSMC
DCD SDIO_IRQHandler ; SDIO
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_IRQHandler ; TIM6
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTCAlarm_IRQHandler [WEAK]
EXPORT USBWakeUp_IRQHandler [WEAK]
EXPORT TIM8_BRK_IRQHandler [WEAK]
EXPORT TIM8_UP_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT ADC3_IRQHandler [WEAK]
EXPORT FSMC_IRQHandler [WEAK]
EXPORT SDIO_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_2_IRQHandler
USB_HP_CAN1_TX_IRQHandler
USB_LP_CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTCAlarm_IRQHandler
USBWakeUp_IRQHandler
TIM8_BRK_IRQHandler
TIM8_UP_IRQHandler
TIM8_TRG_COM_IRQHandler
TIM8_CC_IRQHandler
ADC3_IRQHandler
FSMC_IRQHandler
SDIO_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_IRQHandler
TIM7_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_5_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
CMSIS/Device/ST/STM32F10x/startup/arm/startup_stm32f10x_hd_vl.s
+346
View File
@@ -0,0 +1,346 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd_vl.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Configure the clock system and also configure the external
;* SRAM mounted on STM32100E-EVAL board to be used as data
;* memory (optional, to be enabled by user)
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_IRQHandler ; ADC1
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD CEC_IRQHandler ; HDMI-CEC
DCD TIM12_IRQHandler ; TIM12
DCD TIM13_IRQHandler ; TIM13
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTCAlarm_IRQHandler [WEAK]
EXPORT CEC_IRQHandler [WEAK]
EXPORT TIM12_IRQHandler [WEAK]
EXPORT TIM13_IRQHandler [WEAK]
EXPORT TIM14_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM15_IRQHandler
TIM1_UP_TIM16_IRQHandler
TIM1_TRG_COM_TIM17_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTCAlarm_IRQHandler
CEC_IRQHandler
TIM12_IRQHandler
TIM13_IRQHandler
TIM14_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_5_IRQHandler
DMA2_Channel5_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
CMSIS/Device/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s
+297
View File
@@ -0,0 +1,297 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Configure the clock system
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1_2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD 0 ; Reserved
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTCAlarm_IRQHandler [WEAK]
EXPORT USBWakeUp_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_2_IRQHandler
USB_HP_CAN1_TX_IRQHandler
USB_LP_CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
SPI1_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
EXTI15_10_IRQHandler
RTCAlarm_IRQHandler
USBWakeUp_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
CMSIS/Device/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s
+304
View File
@@ -0,0 +1,304 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld_vl.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Configure the clock system
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_IRQHandler ; ADC1
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD 0 ; Reserved
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD CEC_IRQHandler ; HDMI-CEC
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
DCD TIM7_IRQHandler ; TIM7
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTCAlarm_IRQHandler [WEAK]
EXPORT CEC_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM15_IRQHandler
TIM1_UP_TIM16_IRQHandler
TIM1_TRG_COM_TIM17_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
SPI1_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
EXTI15_10_IRQHandler
RTCAlarm_IRQHandler
CEC_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
CMSIS/Device/ST/STM32F10x/startup/arm/startup_stm32f10x_md.s
+307
View File
@@ -0,0 +1,307 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Configure the clock system
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1_2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_IRQHandler [WEAK]
EXPORT TIM1_UP_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTCAlarm_IRQHandler [WEAK]
EXPORT USBWakeUp_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_2_IRQHandler
USB_HP_CAN1_TX_IRQHandler
USB_LP_CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_IRQHandler
TIM1_UP_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTCAlarm_IRQHandler
USBWakeUp_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
CMSIS/Device/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s
+315
View File
@@ -0,0 +1,315 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md_vl.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Value Line Devices vector table
;* for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Configure the clock system
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_IRQHandler ; ADC1
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD CEC_IRQHandler ; HDMI-CEC
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
DCD TIM7_IRQHandler ; TIM7
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTCAlarm_IRQHandler [WEAK]
EXPORT CEC_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM15_IRQHandler
TIM1_UP_TIM16_IRQHandler
TIM1_TRG_COM_TIM17_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTCAlarm_IRQHandler
CEC_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
CMSIS/Device/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s
+358
View File
@@ -0,0 +1,358 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_xl.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x XL-Density Devices vector table for MDK-ARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Configure the clock system and also configure the external
;* SRAM mounted on STM3210E-EVAL board to be used as data
;* memory (optional, to be enabled by user)
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
DCD ADC3_IRQHandler ; ADC3
DCD FSMC_IRQHandler ; FSMC
DCD SDIO_IRQHandler ; SDIO
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_IRQHandler ; TIM6
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTCAlarm_IRQHandler [WEAK]
EXPORT USBWakeUp_IRQHandler [WEAK]
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
EXPORT TIM8_CC_IRQHandler [WEAK]
EXPORT ADC3_IRQHandler [WEAK]
EXPORT FSMC_IRQHandler [WEAK]
EXPORT SDIO_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT TIM6_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_2_IRQHandler
USB_HP_CAN1_TX_IRQHandler
USB_LP_CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM9_IRQHandler
TIM1_UP_TIM10_IRQHandler
TIM1_TRG_COM_TIM11_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTCAlarm_IRQHandler
USBWakeUp_IRQHandler
TIM8_BRK_TIM12_IRQHandler
TIM8_UP_TIM13_IRQHandler
TIM8_TRG_COM_TIM14_IRQHandler
TIM8_CC_IRQHandler
ADC3_IRQHandler
FSMC_IRQHandler
SDIO_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
TIM6_IRQHandler
TIM7_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_5_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
CMSIS/Device/ST/STM32F10x/startup/gcc/startup_stm32f10x_cl.c
+339
View File
@@ -0,0 +1,339 @@
/**
******************************************************************************
* @file startup_stm32f10x_cl.c
* @author Coocox
* @version V1.0
* @date 3/7/2011
* @brief STM32F10x Connectivity line Devices Startup code.
* This module performs:
* - Set the initial SP
* - Set the vector table entries with the exceptions ISR address
* - Initialize data and bss
* - Setup the microcontroller system.
* - Call the application's entry point.
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
*/
/*----------Macro definition--------------------------------------------------*/
#define WEAK __attribute__ ((weak))
/*----------Declaration of the default fault handlers-------------------------*/
/* System exception vector handler */
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_2_IRQHandler(void);
void WEAK CAN1_TX_IRQHandler(void);
void WEAK CAN1_RX0_IRQHandler(void);
void WEAK CAN1_RX1_IRQHandler(void);
void WEAK CAN1_SCE_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_IRQHandler(void);
void WEAK TIM1_UP_IRQHandler(void);
void WEAK TIM1_TRG_COM_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK TIM4_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK I2C2_EV_IRQHandler(void);
void WEAK I2C2_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK SPI2_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK USART3_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK OTG_FS_WKUP_IRQHandler(void);
void WEAK TIM5_IRQHandler(void);
void WEAK SPI3_IRQHandler(void);
void WEAK UART4_IRQHandler(void);
void WEAK UART5_IRQHandler(void);
void WEAK TIM6_IRQHandler(void);
void WEAK TIM7_IRQHandler(void);
void WEAK DMA2_Channel1_IRQHandler(void);
void WEAK DMA2_Channel2_IRQHandler(void);
void WEAK DMA2_Channel3_IRQHandler(void);
void WEAK DMA2_Channel4_IRQHandler(void);
void WEAK DMA2_Channel5_IRQHandler(void);
void WEAK ETH_IRQHandler(void);
void WEAK ETH_WKUP_IRQHandler(void);
void WEAK CAN2_TX_IRQHandler(void);
void WEAK CAN2_RX0_IRQHandler(void);
void WEAK CAN2_RX1_IRQHandler(void);
void WEAK CAN2_SCE_IRQHandler(void);
void WEAK OTG_FS_IRQHandler(void);
/*----------Symbols defined in linker script----------------------------------*/
extern unsigned long _sidata; /*!< Start address for the initialization
values of the .data section. */
extern unsigned long _sdata; /*!< Start address for the .data section */
extern unsigned long _edata; /*!< End address for the .data section */
extern unsigned long _sbss; /*!< Start address for the .bss section */
extern unsigned long _ebss; /*!< End address for the .bss section */
extern unsigned long _eram; /*!< End address for ram */
/*----------Function prototypes-----------------------------------------------*/
extern int main(void); /*!< The entry point for the application. */
extern void SystemInit(void); /*!< Setup the microcontroller system(CMSIS) */
void Default_Reset_Handler(void); /*!< Default reset handler */
static void Default_Handler(void); /*!< Default exception handler */
/**
*@brief The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x00000000.
*/
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{
/*----------Core Exceptions------------------------------------------------ */
(void *)&_eram, /*!< The initial stack pointer at end of RAM */
Reset_Handler, /*!< Reset Handler */
NMI_Handler, /*!< NMI Handler */
HardFault_Handler, /*!< Hard Fault Handler */
MemManage_Handler, /*!< MPU Fault Handler */
BusFault_Handler, /*!< Bus Fault Handler */
UsageFault_Handler, /*!< Usage Fault Handler */
0,0,0,0, /*!< Reserved */
SVC_Handler, /*!< SVCall Handler */
DebugMon_Handler, /*!< Debug Monitor Handler */
0, /*!< Reserved */
PendSV_Handler, /*!< PendSV Handler */
SysTick_Handler, /*!< SysTick Handler */
/*----------External Exceptions---------------------------------------------*/
WWDG_IRQHandler, /*!< 0: Window Watchdog */
PVD_IRQHandler, /*!< 1: PVD through EXTI Line detect */
TAMPER_IRQHandler, /*!< 2: Tamper */
RTC_IRQHandler, /*!< 3: RTC */
FLASH_IRQHandler, /*!< 4: Flash */
RCC_IRQHandler, /*!< 5: RCC */
EXTI0_IRQHandler, /*!< 6: EXTI Line 0 */
EXTI1_IRQHandler, /*!< 7: EXTI Line 1 */
EXTI2_IRQHandler, /*!< 8: EXTI Line 2 */
EXTI3_IRQHandler, /*!< 9: EXTI Line 3 */
EXTI4_IRQHandler, /*!< 10: EXTI Line 4 */
DMA1_Channel1_IRQHandler, /*!< 11: DMA1 Channel 1 */
DMA1_Channel2_IRQHandler, /*!< 12: DMA1 Channel 2 */
DMA1_Channel3_IRQHandler, /*!< 13: DMA1 Channel 3 */
DMA1_Channel4_IRQHandler, /*!< 14: DMA1 Channel 4 */
DMA1_Channel5_IRQHandler, /*!< 15: DMA1 Channel 5 */
DMA1_Channel6_IRQHandler, /*!< 16: DMA1 Channel 6 */
DMA1_Channel7_IRQHandler, /*!< 17: DMA1 Channel 7 */
ADC1_2_IRQHandler, /*!< 18: ADC1 & ADC2 */
CAN1_TX_IRQHandler, /*!< 19: CAN1 TX */
CAN1_RX0_IRQHandler, /*!< 20: CAN1 RX0 */
CAN1_RX1_IRQHandler, /*!< 21: CAN1 RX1 */
CAN1_SCE_IRQHandler, /*!< 22: CAN1 SCE */
EXTI9_5_IRQHandler, /*!< 23: EXTI Line 9..5 */
TIM1_BRK_IRQHandler, /*!< 24: TIM1 Break */
TIM1_UP_IRQHandler, /*!< 25: TIM1 Update */
TIM1_TRG_COM_IRQHandler, /*!< 26: TIM1 Trigger and Commutation */
TIM1_CC_IRQHandler, /*!< 27: TIM1 Capture Compare */
TIM2_IRQHandler, /*!< 28: TIM2 */
TIM3_IRQHandler, /*!< 29: TIM3 */
TIM4_IRQHandler, /*!< 30: TIM4 */
I2C1_EV_IRQHandler, /*!< 31: I2C1 Event */
I2C1_ER_IRQHandler, /*!< 32: I2C1 Error */
I2C2_EV_IRQHandler, /*!< 33: I2C2 Event */
I2C2_ER_IRQHandler, /*!< 34: I2C2 Error */
SPI1_IRQHandler, /*!< 35: SPI1 */
SPI2_IRQHandler, /*!< 36: SPI2 */
USART1_IRQHandler, /*!< 37: USART1 */
USART2_IRQHandler, /*!< 38: USART2 */
USART3_IRQHandler, /*!< 39: USART3 */
EXTI15_10_IRQHandler, /*!< 40: EXTI Line 15..10 */
RTCAlarm_IRQHandler, /*!< 41: RTC Alarm through EXTI Line */
OTG_FS_WKUP_IRQHandler, /*!< 42: USB OTG FS Wakeup through EXTI line */
0,0,0,0,0,0,0, /*!< Reserved */
TIM5_IRQHandler, /*!< 50: TIM5 */
SPI3_IRQHandler, /*!< 51: SPI3 */
UART4_IRQHandler, /*!< 52: UART4 */
UART5_IRQHandler, /*!< 53: UART5 */
TIM6_IRQHandler, /*!< 54: TIM6 */
TIM7_IRQHandler, /*!< 55: TIM7 */
DMA2_Channel1_IRQHandler, /*!< 56: DMA2 Channel1 */
DMA2_Channel2_IRQHandler, /*!< 57: DMA2 Channel2 */
DMA2_Channel3_IRQHandler, /*!< 58: DMA2 Channel3 */
DMA2_Channel4_IRQHandler, /*!< 59: DMA2 Channel4 */
DMA2_Channel5_IRQHandler, /*!< 60: DMA2 Channel5 */
ETH_IRQHandler, /*!< 61: Ethernet */
ETH_WKUP_IRQHandler, /*!< 62: Ethernet Wakeup through EXTI line */
CAN2_TX_IRQHandler, /*!< 63: CAN2 TX */
CAN2_RX0_IRQHandler, /*!< 64: CAN2 RX0 */
CAN2_RX1_IRQHandler, /*!< 65: CAN2 RX1 */
CAN2_SCE_IRQHandler, /*!< 66: CAN2 SCE */
OTG_FS_IRQHandler, /*!< 67: USB OTG FS */
(void *)0xF108F85F /*!< Boot in RAM mode */
};
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
void Default_Reset_Handler(void)
{
/* Initialize data and bss */
unsigned long *pulSrc, *pulDest;
/* Copy the data segment initializers from flash to SRAM */
pulSrc = &_sidata;
for(pulDest = &_sdata; pulDest < &_edata; )
{
*(pulDest++) = *(pulSrc++);
}
/* Zero fill the bss segment. This is done with inline assembly since this
will clear the value of pulDest if it is not kept in a register. */
__asm(" ldr r0, =_sbss\n"
" ldr r1, =_ebss\n"
" mov r2, #0\n"
" .thumb_func\n"
"zero_loop:\n"
" cmp r0, r1\n"
" it lt\n"
" strlt r2, [r0], #4\n"
" blt zero_loop");
/* Setup the microcontroller system. */
SystemInit();
/* Call the application's entry point.*/
main();
}
/**
*@brief Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*/
#pragma weak Reset_Handler = Default_Reset_Handler
#pragma weak NMI_Handler = Default_Handler
#pragma weak HardFault_Handler = Default_Handler
#pragma weak MemManage_Handler = Default_Handler
#pragma weak BusFault_Handler = Default_Handler
#pragma weak UsageFault_Handler = Default_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_2_IRQHandler = Default_Handler
#pragma weak CAN1_TX_IRQHandler = Default_Handler
#pragma weak CAN1_RX0_IRQHandler = Default_Handler
#pragma weak CAN1_RX1_IRQHandler = Default_Handler
#pragma weak CAN1_SCE_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_IRQHandler = Default_Handler
#pragma weak TIM1_UP_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak TIM4_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak I2C2_EV_IRQHandler = Default_Handler
#pragma weak I2C2_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak SPI2_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak USART3_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak OTG_FS_WKUP_IRQHandler = Default_Handler
#pragma weak TIM5_IRQHandler = Default_Handler
#pragma weak SPI3_IRQHandler = Default_Handler
#pragma weak UART4_IRQHandler = Default_Handler
#pragma weak UART5_IRQHandler = Default_Handler
#pragma weak TIM6_IRQHandler = Default_Handler
#pragma weak TIM7_IRQHandler = Default_Handler
#pragma weak DMA2_Channel1_IRQHandler = Default_Handler
#pragma weak DMA2_Channel2_IRQHandler = Default_Handler
#pragma weak DMA2_Channel3_IRQHandler = Default_Handler
#pragma weak DMA2_Channel4_IRQHandler = Default_Handler
#pragma weak DMA2_Channel5_IRQHandler = Default_Handler
#pragma weak ETH_IRQHandler = Default_Handler
#pragma weak ETH_WKUP_IRQHandler = Default_Handler
#pragma weak CAN2_TX_IRQHandler = Default_Handler
#pragma weak CAN2_RX0_IRQHandler = Default_Handler
#pragma weak CAN2_RX1_IRQHandler = Default_Handler
#pragma weak CAN2_SCE_IRQHandler = Default_Handler
#pragma weak OTG_FS_IRQHandler = Default_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop,
* preserving the system state for examination by a debugger.
* @param None
* @retval None
*/
static void Default_Handler(void)
{
/* Go into an infinite loop. */
while (1)
{
}
}
/*********************** (C) COPYRIGHT 2011 Coocox ************END OF FILE*****/
CMSIS/Device/ST/STM32F10x/startup/gcc/startup_stm32f10x_hd.c
+352
View File
@@ -0,0 +1,352 @@
/**
******************************************************************************
* @file startup_stm32f10x_hd.c
* @author Coocox
* @version V1.0
* @date 3/7/2011
* @brief STM32F10x High Density Devices Startup code.
* This module performs:
* - Set the initial SP
* - Set the vector table entries with the exceptions ISR address
* - Initialize data and bss
* - Setup the microcontroller system.
* - Call the application's entry point.
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
*/
/*----------Macro definition--------------------------------------------------*/
#define WEAK __attribute__ ((weak))
/*----------Declaration of the default fault handlers-------------------------*/
/* System exception vector handler */
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_2_IRQHandler(void);
void WEAK USB_HP_CAN1_TX_IRQHandler(void);
void WEAK USB_LP_CAN1_RX0_IRQHandler(void);
void WEAK CAN1_RX1_IRQHandler(void);
void WEAK CAN1_SCE_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_IRQHandler(void);
void WEAK TIM1_UP_IRQHandler(void);
void WEAK TIM1_TRG_COM_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK TIM4_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK I2C2_EV_IRQHandler(void);
void WEAK I2C2_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK SPI2_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK USART3_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK USBWakeUp_IRQHandler(void);
void WEAK TIM8_BRK_IRQHandler(void);
void WEAK TIM8_UP_IRQHandler(void);
void WEAK TIM8_TRG_COM_IRQHandler(void);
void WEAK TIM8_CC_IRQHandler(void);
void WEAK ADC3_IRQHandler(void);
void WEAK FSMC_IRQHandler(void);
void WEAK SDIO_IRQHandler(void);
void WEAK TIM5_IRQHandler(void);
void WEAK SPI3_IRQHandler(void);
void WEAK UART4_IRQHandler(void);
void WEAK UART5_IRQHandler(void);
void WEAK TIM6_IRQHandler(void);
void WEAK TIM7_IRQHandler(void);
void WEAK DMA2_Channel1_IRQHandler(void);
void WEAK DMA2_Channel2_IRQHandler(void);
void WEAK DMA2_Channel3_IRQHandler(void);
void WEAK DMA2_Channel4_5_IRQHandler(void);
/*----------Symbols defined in linker script----------------------------------*/
extern unsigned long _sidata; /*!< Start address for the initialization
values of the .data section. */
extern unsigned long _sdata; /*!< Start address for the .data section */
extern unsigned long _edata; /*!< End address for the .data section */
extern unsigned long _sbss; /*!< Start address for the .bss section */
extern unsigned long _ebss; /*!< End address for the .bss section */
extern unsigned long _eram; /*!< End address for ram */
/*----------Function prototypes-----------------------------------------------*/
extern int main(void); /*!< The entry point for the application. */
extern void SystemInit(void); /*!< Setup the microcontroller system(CMSIS) */
void Default_Reset_Handler(void); /*!< Default reset handler */
static void Default_Handler(void); /*!< Default exception handler */
/**
*@brief The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x00000000.
*/
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{
/*----------Core Exceptions-------------------------------------------------*/
(void *)&_eram, /*!< The initial stack pointer at end of RAM */
Reset_Handler, /*!< Reset Handler */
NMI_Handler, /*!< NMI Handler */
HardFault_Handler, /*!< Hard Fault Handler */
MemManage_Handler, /*!< MPU Fault Handler */
BusFault_Handler, /*!< Bus Fault Handler */
UsageFault_Handler, /*!< Usage Fault Handler */
0,0,0,0, /*!< Reserved */
SVC_Handler, /*!< SVCall Handler */
DebugMon_Handler, /*!< Debug Monitor Handler */
0, /*!< Reserved */
PendSV_Handler, /*!< PendSV Handler */
SysTick_Handler, /*!< SysTick Handler */
/*----------External Exceptions---------------------------------------------*/
WWDG_IRQHandler, /*!< 0: Window Watchdog */
PVD_IRQHandler, /*!< 1: PVD through EXTI Line detect */
TAMPER_IRQHandler, /*!< 2: Tamper */
RTC_IRQHandler, /*!< 3: RTC */
FLASH_IRQHandler, /*!< 4: Flash */
RCC_IRQHandler, /*!< 5: RCC */
EXTI0_IRQHandler, /*!< 6: EXTI Line 0 */
EXTI1_IRQHandler, /*!< 7: EXTI Line 1 */
EXTI2_IRQHandler, /*!< 8: EXTI Line 2 */
EXTI3_IRQHandler, /*!< 9: EXTI Line 3 */
EXTI4_IRQHandler, /*!< 10: EXTI Line 4 */
DMA1_Channel1_IRQHandler, /*!< 11: DMA1 Channel 1 */
DMA1_Channel2_IRQHandler, /*!< 12: DMA1 Channel 2 */
DMA1_Channel3_IRQHandler, /*!< 13: DMA1 Channel 3 */
DMA1_Channel4_IRQHandler, /*!< 14: DMA1 Channel 4 */
DMA1_Channel5_IRQHandler, /*!< 15: DMA1 Channel 5 */
DMA1_Channel6_IRQHandler, /*!< 16: DMA1 Channel 6 */
DMA1_Channel7_IRQHandler, /*!< 17: DMA1 Channel 7 */
ADC1_2_IRQHandler, /*!< 18: ADC1 & ADC2 */
USB_HP_CAN1_TX_IRQHandler, /*!< 19: USB High Priority or CAN1 TX */
USB_LP_CAN1_RX0_IRQHandler, /*!< 20: USB Low Priority or CAN1 RX0 */
CAN1_RX1_IRQHandler, /*!< 21: CAN1 RX1 */
CAN1_SCE_IRQHandler, /*!< 22: CAN1 SCE */
EXTI9_5_IRQHandler, /*!< 23: EXTI Line 9..5 */
TIM1_BRK_IRQHandler, /*!< 24: TIM1 Break */
TIM1_UP_IRQHandler, /*!< 25: TIM1 Update */
TIM1_TRG_COM_IRQHandler, /*!< 26: TIM1 Trigger and Commutation */
TIM1_CC_IRQHandler, /*!< 27: TIM1 Capture Compare */
TIM2_IRQHandler, /*!< 28: TIM2 */
TIM3_IRQHandler, /*!< 29: TIM3 */
TIM4_IRQHandler, /*!< 30: TIM4 */
I2C1_EV_IRQHandler, /*!< 31: I2C1 Event */
I2C1_ER_IRQHandler, /*!< 32: I2C1 Error */
I2C2_EV_IRQHandler, /*!< 33: I2C2 Event */
I2C2_ER_IRQHandler, /*!< 34: I2C2 Error */
SPI1_IRQHandler, /*!< 35: SPI1 */
SPI2_IRQHandler, /*!< 36: SPI2 */
USART1_IRQHandler, /*!< 37: USART1 */
USART2_IRQHandler, /*!< 38: USART2 */
USART3_IRQHandler, /*!< 39: USART3 */
EXTI15_10_IRQHandler, /*!< 40: EXTI Line 15..10 */
RTCAlarm_IRQHandler, /*!< 41: RTC Alarm through EXTI Line */
USBWakeUp_IRQHandler, /*!< 42: USB Wakeup from suspend */
TIM8_BRK_IRQHandler, /*!< 43: TIM8 Break */
TIM8_UP_IRQHandler, /*!< 44: TIM8 Update */
TIM8_TRG_COM_IRQHandler, /*!< 45: TIM8 Trigger and Commutation */
TIM8_CC_IRQHandler, /*!< 46: TIM8 Capture Compare */
ADC3_IRQHandler, /*!< 47: ADC3 */
FSMC_IRQHandler, /*!< 48: FSMC */
SDIO_IRQHandler, /*!< 49: SDIO */
TIM5_IRQHandler, /*!< 50: TIM5 */
SPI3_IRQHandler, /*!< 51: SPI3 */
UART4_IRQHandler, /*!< 52: UART4 */
UART5_IRQHandler, /*!< 52: UART5 */
TIM6_IRQHandler, /*!< 53: TIM6 */
TIM7_IRQHandler, /*!< 54: TIM7 */
DMA2_Channel1_IRQHandler, /*!< 55: DMA2 Channel1 */
DMA2_Channel2_IRQHandler, /*!< 56: DMA2 Channel2 */
DMA2_Channel3_IRQHandler, /*!< 57: DMA2 Channel3 */
DMA2_Channel4_5_IRQHandler, /*!< 58: DMA2 Channel4 & Channel5 */
(void *)0xF108F85F /*!< Boot in RAM mode */
};
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
void Default_Reset_Handler(void)
{
/* Initialize data and bss */
unsigned long *pulSrc, *pulDest;
/* Copy the data segment initializers from flash to SRAM */
pulSrc = &_sidata;
for(pulDest = &_sdata; pulDest < &_edata; )
{
*(pulDest++) = *(pulSrc++);
}
/* Zero fill the bss segment. This is done with inline assembly since this
will clear the value of pulDest if it is not kept in a register. */
__asm(" ldr r0, =_sbss\n"
" ldr r1, =_ebss\n"
" mov r2, #0\n"
" .thumb_func\n"
"zero_loop:\n"
" cmp r0, r1\n"
" it lt\n"
" strlt r2, [r0], #4\n"
" blt zero_loop");
/* Setup the microcontroller system. */
SystemInit();
/* Call the application's entry point.*/
main();
}
void Default_HardFault_Handler (void)
{
while (1);
}
void Default_MemManage_Handler(void)
{
while (1);
}
void Default_BusFault_Handler(void)
{
while (1);
}
void Default_UsageFault_Handler(void)
{
while (1);
}
/**
*@brief Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*/
#pragma weak Reset_Handler = Default_Reset_Handler
#pragma weak NMI_Handler = Default_Handler
#pragma weak HardFault_Handler = Default_HardFault_Handler
#pragma weak MemManage_Handler = Default_MemManage_Handler
#pragma weak BusFault_Handler = Default_BusFault_Handler
#pragma weak UsageFault_Handler = Default_UsageFault_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_2_IRQHandler = Default_Handler
#pragma weak USB_HP_CAN1_TX_IRQHandler = Default_Handler
#pragma weak USB_LP_CAN1_RX0_IRQHandler = Default_Handler
#pragma weak CAN1_RX1_IRQHandler = Default_Handler
#pragma weak CAN1_SCE_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_IRQHandler = Default_Handler
#pragma weak TIM1_UP_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak TIM4_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak I2C2_EV_IRQHandler = Default_Handler
#pragma weak I2C2_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak SPI2_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak USART3_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak USBWakeUp_IRQHandler = Default_Handler
#pragma weak TIM8_BRK_IRQHandler = Default_Handler
#pragma weak TIM8_UP_IRQHandler = Default_Handler
#pragma weak TIM8_TRG_COM_IRQHandler = Default_Handler
#pragma weak TIM8_CC_IRQHandler = Default_Handler
#pragma weak ADC3_IRQHandler = Default_Handler
#pragma weak FSMC_IRQHandler = Default_Handler
#pragma weak SDIO_IRQHandler = Default_Handler
#pragma weak TIM5_IRQHandler = Default_Handler
#pragma weak SPI3_IRQHandler = Default_Handler
#pragma weak UART4_IRQHandler = Default_Handler
#pragma weak UART5_IRQHandler = Default_Handler
#pragma weak TIM6_IRQHandler = Default_Handler
#pragma weak TIM7_IRQHandler = Default_Handler
#pragma weak DMA2_Channel1_IRQHandler = Default_Handler
#pragma weak DMA2_Channel2_IRQHandler = Default_Handler
#pragma weak DMA2_Channel3_IRQHandler = Default_Handler
#pragma weak DMA2_Channel4_5_IRQHandler = Default_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop,
* preserving the system state for examination by a debugger.
* @param None
* @retval None
*/
static void Default_Handler(void)
{
/* Go into an infinite loop. */
while (1)
{
}
}
/*********************** (C) COPYRIGHT 2011 Coocox ************END OF FILE*****/
CMSIS/Device/ST/STM32F10x/startup/gcc/startup_stm32f10x_hd_vl.c
+322
View File
@@ -0,0 +1,322 @@
/**
******************************************************************************
* @file startup_stm32f10x_hd_vl.c
* @author Coocox
* @version V1.0
* @date 3/7/2011
* @brief STM32F10x High Density Value line Devices Startup code.
* This module performs:
* - Set the initial SP
* - Set the vector table entries with the exceptions ISR address
* - Initialize data and bss
* - Setup the microcontroller system.
* - Call the application's entry point.
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
*/
/*----------Macro definition--------------------------------------------------*/
#define WEAK __attribute__ ((weak))
/*----------Declaration of the default fault handlers-------------------------*/
/* System exception vector handler */
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_TIM15_IRQHandler(void);
void WEAK TIM1_UP_TIM16_IRQHandler(void);
void WEAK TIM1_TRG_COM_TIM17_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK TIM4_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK I2C2_EV_IRQHandler(void);
void WEAK I2C2_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK SPI2_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK USART3_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK CEC_IRQHandler(void);
void WEAK TIM12_IRQHandler(void);
void WEAK TIM13_IRQHandler(void);
void WEAK TIM14_IRQHandler(void);
void WEAK FSMC_IRQHandler(void);
void WEAK TIM5_IRQHandler(void);
void WEAK SPI3_IRQHandler(void);
void WEAK UART4_IRQHandler(void);
void WEAK UART5_IRQHandler(void);
void WEAK TIM6_DAC_IRQHandler(void);
void WEAK TIM7_IRQHandler(void);
void WEAK DMA2_Channel1_IRQHandler(void);
void WEAK DMA2_Channel2_IRQHandler(void);
void WEAK DMA2_Channel3_IRQHandler(void);
void WEAK DMA2_Channel4_5_IRQHandler(void);
void WEAK DMA2_Channel5_IRQHandler(void);
/*----------Symbols defined in linker script----------------------------------*/
extern unsigned long _sidata; /*!< Start address for the initialization
values of the .data section. */
extern unsigned long _sdata; /*!< Start address for the .data section */
extern unsigned long _edata; /*!< End address for the .data section */
extern unsigned long _sbss; /*!< Start address for the .bss section */
extern unsigned long _ebss; /*!< End address for the .bss section */
extern unsigned long _eram; /*!< End address for ram */
/*----------Function prototypes-----------------------------------------------*/
extern int main(void); /*!< The entry point for the application. */
extern void SystemInit(void); /*!< Setup the microcontroller system(CMSIS) */
void Default_Reset_Handler(void); /*!< Default reset handler */
static void Default_Handler(void); /*!< Default exception handler */
/**
*@brief The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x00000000.
*/
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{
/*----------Core Exceptions------------------------------------------------ */
(void *)&_eram, /*!< The initial stack pointer at end of RAM */
Reset_Handler, /*!< Reset Handler */
NMI_Handler, /*!< NMI Handler */
HardFault_Handler, /*!< Hard Fault Handler */
MemManage_Handler, /*!< MPU Fault Handler */
BusFault_Handler, /*!< Bus Fault Handler */
UsageFault_Handler, /*!< Usage Fault Handler */
0,0,0,0, /*!< Reserved */
SVC_Handler, /*!< SVCall Handler */
DebugMon_Handler, /*!< Debug Monitor Handler */
0, /*!< Reserved */
PendSV_Handler, /*!< PendSV Handler */
SysTick_Handler, /*!< SysTick Handler */
/*----------External Exceptions---------------------------------------------*/
WWDG_IRQHandler, /*!< 0: Window Watchdog */
PVD_IRQHandler, /*!< 1: PVD through EXTI Line detect */
TAMPER_IRQHandler, /*!< 2: Tamper */
RTC_IRQHandler, /*!< 3: RTC */
FLASH_IRQHandler, /*!< 4: Flash */
RCC_IRQHandler, /*!< 5: RCC */
EXTI0_IRQHandler, /*!< 6: EXTI Line 0 */
EXTI1_IRQHandler, /*!< 7: EXTI Line 1 */
EXTI2_IRQHandler, /*!< 8: EXTI Line 2 */
EXTI3_IRQHandler, /*!< 9: EXTI Line 3 */
EXTI4_IRQHandler, /*!< 10: EXTI Line 4 */
DMA1_Channel1_IRQHandler, /*!< 11: DMA1 Channel 1 */
DMA1_Channel2_IRQHandler, /*!< 12: DMA1 Channel 2 */
DMA1_Channel3_IRQHandler, /*!< 13: DMA1 Channel 3 */
DMA1_Channel4_IRQHandler, /*!< 14: DMA1 Channel 4 */
DMA1_Channel5_IRQHandler, /*!< 15: DMA1 Channel 5 */
DMA1_Channel6_IRQHandler, /*!< 16: DMA1 Channel 6 */
DMA1_Channel7_IRQHandler, /*!< 17: DMA1 Channel 7 */
ADC1_IRQHandler, /*!< 18: ADC1 */
0, /*!< 19: USB High Priority or CAN1 TX */
0, /*!< 20: USB Low Priority or CAN1 RX0 */
0, /*!< 21: CAN1 RX1 */
0, /*!< 22: CAN1 SCE */
EXTI9_5_IRQHandler, /*!< 23: EXTI Line 9..5 */
TIM1_BRK_TIM15_IRQHandler, /*!< 24: TIM1 Break and TIM15 */
TIM1_UP_TIM16_IRQHandler, /*!< 25: TIM1 Update and TIM16 */
TIM1_TRG_COM_TIM17_IRQHandler,/*!< 26: TIM1 Trigger and Commutation and TIM17 */
TIM1_CC_IRQHandler, /*!< 27: TIM1 Capture Compare */
TIM2_IRQHandler, /*!< 28: TIM2 */
TIM3_IRQHandler, /*!< 29: TIM3 */
TIM4_IRQHandler, /*!< 30: TIM4 */
I2C1_EV_IRQHandler, /*!< 31: I2C1 Event */
I2C1_ER_IRQHandler, /*!< 32: I2C1 Error */
I2C2_EV_IRQHandler, /*!< 33: I2C2 Event */
I2C2_ER_IRQHandler, /*!< 34: I2C2 Error */
SPI1_IRQHandler, /*!< 35: SPI1 */
SPI2_IRQHandler, /*!< 36: SPI2 */
USART1_IRQHandler, /*!< 37: USART1 */
USART2_IRQHandler, /*!< 38: USART2 */
USART3_IRQHandler, /*!< 39: USART3 */
EXTI15_10_IRQHandler, /*!< 40: EXTI Line 15..10 */
RTCAlarm_IRQHandler, /*!< 41: RTC Alarm through EXTI Line */
CEC_IRQHandler, /*!< 42: HDMI-CEC */
TIM12_IRQHandler, /*!< 43: TIM12 */
TIM13_IRQHandler, /*!< 44: TIM13 */
TIM14_IRQHandler, /*!< 45: TIM14 */
0, /*!< 46: Reserved */
0, /*!< 47: Reserved */
FSMC_IRQHandler, /*!< 48: FSMC */
0, /*!< 49: Reserved */
TIM5_IRQHandler, /*!< 50: TIM5 */
SPI3_IRQHandler, /*!< 51: SPI3 */
UART4_IRQHandler, /*!< 52: UART4 */
UART5_IRQHandler, /*!< 53: UART5 */
TIM6_DAC_IRQHandler, /*!< 54: TIM6 and DAC underrun */
TIM7_IRQHandler, /*!< 55: TIM7 */
DMA2_Channel1_IRQHandler, /*!< 56: DMA2 Channel1 */
DMA2_Channel2_IRQHandler, /*!< 57: DMA2 Channel2 */
DMA2_Channel3_IRQHandler, /*!< 58: DMA2 Channel3 */
DMA2_Channel4_5_IRQHandler, /*!< 59: DMA2 Channel4 & Channel5 */
DMA2_Channel5_IRQHandler, /*!< 60: DMA2 Channel5 */
(void *)0xF108F85F /*!< Boot in RAM mode */
};
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
void Default_Reset_Handler(void)
{
/* Initialize data and bss */
unsigned long *pulSrc, *pulDest;
/* Copy the data segment initializers from flash to SRAM */
pulSrc = &_sidata;
for(pulDest = &_sdata; pulDest < &_edata; )
{
*(pulDest++) = *(pulSrc++);
}
/* Zero fill the bss segment. This is done with inline assembly since this
will clear the value of pulDest if it is not kept in a register. */
__asm(" ldr r0, =_sbss\n"
" ldr r1, =_ebss\n"
" mov r2, #0\n"
" .thumb_func\n"
" zero_loop:\n"
" cmp r0, r1\n"
" it lt\n"
" strlt r2, [r0], #4\n"
" blt zero_loop");
/* Setup the microcontroller system. */
SystemInit();
/* Call the application's entry point.*/
main();
}
/**
*@brief Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*/
#pragma weak Reset_Handler = Default_Reset_Handler
#pragma weak NMI_Handler = Default_Handler
#pragma weak HardFault_Handler = Default_Handler
#pragma weak MemManage_Handler = Default_Handler
#pragma weak BusFault_Handler = Default_Handler
#pragma weak UsageFault_Handler = Default_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_TIM15_IRQHandler = Default_Handler
#pragma weak TIM1_UP_TIM16_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_TIM17_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak TIM4_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak I2C2_EV_IRQHandler = Default_Handler
#pragma weak I2C2_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak SPI2_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak USART3_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak CEC_IRQHandler = Default_Handler
#pragma weak TIM12_IRQHandler = Default_Handler
#pragma weak TIM13_IRQHandler = Default_Handler
#pragma weak TIM14_IRQHandler = Default_Handler
#pragma weak FSMC_IRQHandler = Default_Handler
#pragma weak TIM5_IRQHandler = Default_Handler
#pragma weak SPI3_IRQHandler = Default_Handler
#pragma weak UART4_IRQHandler = Default_Handler
#pragma weak UART5_IRQHandler = Default_Handler
#pragma weak TIM6_DAC_IRQHandler = Default_Handler
#pragma weak TIM7_IRQHandler = Default_Handler
#pragma weak DMA2_Channel1_IRQHandler = Default_Handler
#pragma weak DMA2_Channel2_IRQHandler = Default_Handler
#pragma weak DMA2_Channel3_IRQHandler = Default_Handler
#pragma weak DMA2_Channel4_5_IRQHandler = Default_Handler
#pragma weak DMA2_Channel5_IRQHandler = Default_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop,
* preserving the system state for examination by a debugger.
* @param None
* @retval None
*/
static void Default_Handler(void)
{
/* Go into an infinite loop. */
while (1)
{
}
}
/*********************** (C) COPYRIGHT 2011 Coocox ************END OF FILE*****/
CMSIS/Device/ST/STM32F10x/startup/gcc/startup_stm32f10x_ld.c
+275
View File
@@ -0,0 +1,275 @@
/**
******************************************************************************
* @file startup_stm32f10x_ld.c
* @author Coocox
* @version V1.0
* @date 3/7/2011
* @brief STM32F10x Low Density Devices Startup code.
* This module performs:
* - Set the initial SP
* - Set the vector table entries with the exceptions ISR address
* - Initialize data and bss
* - Setup the microcontroller system.
* - Call the application's entry point.
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
*/
/*----------Macro definition--------------------------------------------------*/
#define WEAK __attribute__ ((weak))
/*----------Declaration of the default fault handlers-------------------------*/
/* System exception vector handler */
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_2_IRQHandler(void);
void WEAK USB_HP_CAN1_TX_IRQHandler(void);
void WEAK USB_LP_CAN1_RX0_IRQHandler(void);
void WEAK CAN1_RX1_IRQHandler(void);
void WEAK CAN1_SCE_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_IRQHandler(void);
void WEAK TIM1_UP_IRQHandler(void);
void WEAK TIM1_TRG_COM_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK USBWakeUp_IRQHandler(void);
/*----------Symbols defined in linker script----------------------------------*/
extern unsigned long _sidata; /*!< Start address for the initialization
values of the .data section. */
extern unsigned long _sdata; /*!< Start address for the .data section */
extern unsigned long _edata; /*!< End address for the .data section */
extern unsigned long _sbss; /*!< Start address for the .bss section */
extern unsigned long _ebss; /*!< End address for the .bss section */
extern unsigned long _eram; /*!< End address for ram */
/*----------Function prototypes-----------------------------------------------*/
extern int main(void); /*!< The entry point for the application. */
extern void SystemInit(void); /*!< Setup the microcontroller system(CMSIS) */
void Default_Reset_Handler(void); /*!< Default reset handler */
static void Default_Handler(void); /*!< Default exception handler */
/**
*@brief The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x00000000.
*/
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{
/*----------Core Exceptions-------------------------------------------------*/
(void *)&_eram, /*!< The initial stack pointer at end of RAM */
Reset_Handler, /*!< Reset Handler */
NMI_Handler, /*!< NMI Handler */
HardFault_Handler, /*!< Hard Fault Handler */
MemManage_Handler, /*!< MPU Fault Handler */
BusFault_Handler, /*!< Bus Fault Handler */
UsageFault_Handler, /*!< Usage Fault Handler */
0,0,0,0, /*!< Reserved */
SVC_Handler, /*!< SVCall Handler */
DebugMon_Handler, /*!< Debug Monitor Handler */
0, /*!< Reserved */
PendSV_Handler, /*!< PendSV Handler */
SysTick_Handler, /*!< SysTick Handler */
/*----------External Exceptions---------------------------------------------*/
WWDG_IRQHandler, /*!< 0: Window Watchdog */
PVD_IRQHandler, /*!< 1: PVD through EXTI Line detect */
TAMPER_IRQHandler, /*!< 2: Tamper */
RTC_IRQHandler, /*!< 3: RTC */
FLASH_IRQHandler, /*!< 4: Flash */
RCC_IRQHandler, /*!< 5: RCC */
EXTI0_IRQHandler, /*!< 6: EXTI Line 0 */
EXTI1_IRQHandler, /*!< 7: EXTI Line 1 */
EXTI2_IRQHandler, /*!< 8: EXTI Line 2 */
EXTI3_IRQHandler, /*!< 9: EXTI Line 3 */
EXTI4_IRQHandler, /*!< 10: EXTI Line 4 */
DMA1_Channel1_IRQHandler, /*!< 11: DMA1 Channel 1 */
DMA1_Channel2_IRQHandler, /*!< 12: DMA1 Channel 2 */
DMA1_Channel3_IRQHandler, /*!< 13: DMA1 Channel 3 */
DMA1_Channel4_IRQHandler, /*!< 14: DMA1 Channel 4 */
DMA1_Channel5_IRQHandler, /*!< 15: DMA1 Channel 5 */
DMA1_Channel6_IRQHandler, /*!< 16: DMA1 Channel 6 */
DMA1_Channel7_IRQHandler, /*!< 17: DMA1 Channel 7 */
ADC1_2_IRQHandler, /*!< 18: ADC1 & ADC2 */
USB_HP_CAN1_TX_IRQHandler, /*!< 19: USB High Priority or CAN1 TX */
USB_LP_CAN1_RX0_IRQHandler, /*!< 20: USB Low Priority or CAN1 RX0 */
CAN1_RX1_IRQHandler, /*!< 21: CAN1 RX1 */
CAN1_SCE_IRQHandler, /*!< 22: CAN1 SCE */
EXTI9_5_IRQHandler, /*!< 23: EXTI Line 9..5 */
TIM1_BRK_IRQHandler, /*!< 24: TIM1 Break */
TIM1_UP_IRQHandler, /*!< 25: TIM1 Update */
TIM1_TRG_COM_IRQHandler, /*!< 26: TIM1 Trigger and Commutation */
TIM1_CC_IRQHandler, /*!< 27: TIM1 Capture Compare */
TIM2_IRQHandler, /*!< 28: TIM2 */
TIM3_IRQHandler, /*!< 29: TIM3 */
0, /*!< 30: Reserved */
I2C1_EV_IRQHandler, /*!< 31: I2C1 Event */
I2C1_ER_IRQHandler, /*!< 32: I2C1 Error */
0, /*!< 33: Reserved */
0, /*!< 34: Reserved */
SPI1_IRQHandler, /*!< 35: SPI1 */
0, /*!< 36: Reserved */
USART1_IRQHandler, /*!< 37: USART1 */
USART2_IRQHandler, /*!< 38: USART2 */
0, /*!< 39: Reserved */
EXTI15_10_IRQHandler, /*!< 40: EXTI Line 15..10 */
RTCAlarm_IRQHandler, /*!< 41: RTC Alarm through EXTI Line */
USBWakeUp_IRQHandler, /*!< 42: USB Wakeup from suspend */
0,0,0,0,0,0,0, /*!< Reserved */
(void *)0xF108F85F /*!< Boot in RAM mode */
};
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
void Default_Reset_Handler(void)
{
/* Initialize data and bss */
unsigned long *pulSrc, *pulDest;
/* Copy the data segment initializers from flash to SRAM */
pulSrc = &_sidata;
for(pulDest = &_sdata; pulDest < &_edata; )
{
*(pulDest++) = *(pulSrc++);
}
/* Zero fill the bss segment. This is done with inline assembly since this
will clear the value of pulDest if it is not kept in a register. */
__asm(" ldr r0, =_sbss\n"
" ldr r1, =_ebss\n"
" mov r2, #0\n"
" .thumb_func\n"
"zero_loop:\n"
" cmp r0, r1\n"
" it lt\n"
" strlt r2, [r0], #4\n"
" blt zero_loop");
/* Setup the microcontroller system. */
SystemInit();
/* Call the application's entry point.*/
main();
}
/**
*@brief Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*/
#pragma weak Reset_Handler = Default_Reset_Handler
#pragma weak NMI_Handler = Default_Handler
#pragma weak HardFault_Handler = Default_Handler
#pragma weak MemManage_Handler = Default_Handler
#pragma weak BusFault_Handler = Default_Handler
#pragma weak UsageFault_Handler = Default_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_2_IRQHandler = Default_Handler
#pragma weak USB_HP_CAN1_TX_IRQHandler = Default_Handler
#pragma weak USB_LP_CAN1_RX0_IRQHandler = Default_Handler
#pragma weak CAN1_RX1_IRQHandler = Default_Handler
#pragma weak CAN1_SCE_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_IRQHandler = Default_Handler
#pragma weak TIM1_UP_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak USBWakeUp_IRQHandler = Default_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop,
* preserving the system state for examination by a debugger.
* @param None
* @retval None
*/
static void Default_Handler(void)
{
/* Go into an infinite loop. */
while (1)
{
}
}
/*********************** (C) COPYRIGHT 2011 Coocox ************END OF FILE*****/
CMSIS/Device/ST/STM32F10x/startup/gcc/startup_stm32f10x_ld_vl.c
+272
View File
@@ -0,0 +1,272 @@
/**
******************************************************************************
* @file startup_stm32f10x_ld_vl.c
* @author Coocox
* @version V1.0
* @date 3/4/2011
* @brief STM32F10x Low Density Value Line Devices Startup code.
* This module performs:
* - Set the initial SP
* - Set the vector table entries with the exceptions ISR address
* - Initialize data and bss
* - Setup the microcontroller system.
* - Call the application's entry point.
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
*/
/*----------Macro definition--------------------------------------------------*/
#define WEAK __attribute__ ((weak))
/*----------Declaration of the default fault handlers-------------------------*/
/* System exception vector handler */
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_TIM15_IRQHandler(void);
void WEAK TIM1_UP_TIM16_IRQHandler(void);
void WEAK TIM1_TRG_COM_TIM17_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK CEC_IRQHandler(void);
void WEAK TIM6_DAC_IRQHandler(void);
void WEAK TIM7_IRQHandler(void);
/*----------Symbols defined in linker script----------------------------------*/
extern unsigned long _sidata; /*!< Start address for the initialization
values of the .data section. */
extern unsigned long _sdata; /*!< Start address for the .data section */
extern unsigned long _edata; /*!< End address for the .data section */
extern unsigned long _sbss; /*!< Start address for the .bss section */
extern unsigned long _ebss; /*!< End address for the .bss section */
extern unsigned long _eram; /*!< End address for ram */
/*----------Function prototypes-----------------------------------------------*/
extern int main(void); /*!< The entry point for the application. */
extern void SystemInit(void); /*!< Setup the microcontroller system(CMSIS) */
void Default_Reset_Handler(void); /*!< Default reset handler */
static void Default_Handler(void); /*!< Default exception handler */
/**
*@brief The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x00000000.
*/
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{
/*----------Core Exceptions-------------------------------------------------*/
(void *)&_eram, /*!< The initial stack pointer at end of RAM */
Reset_Handler, /*!< Reset Handler */
NMI_Handler, /*!< NMI Handler */
HardFault_Handler, /*!< Hard Fault Handler */
MemManage_Handler, /*!< MPU Fault Handler */
BusFault_Handler, /*!< Bus Fault Handler */
UsageFault_Handler, /*!< Usage Fault Handler */
0,0,0,0, /*!< Reserved */
SVC_Handler, /*!< SVCall Handler */
DebugMon_Handler, /*!< Debug Monitor Handler */
0, /*!< Reserved */
PendSV_Handler, /*!< PendSV Handler */
SysTick_Handler, /*!< SysTick Handler */
/*----------External Exceptions---------------------------------------------*/
WWDG_IRQHandler, /*!< 0: Window Watchdog */
PVD_IRQHandler, /*!< 1: PVD through EXTI Line detect */
TAMPER_IRQHandler, /*!< 2: Tamper */
RTC_IRQHandler, /*!< 3: RTC */
FLASH_IRQHandler, /*!< 4: Flash */
RCC_IRQHandler, /*!< 5: RCC */
EXTI0_IRQHandler, /*!< 6: EXTI Line 0 */
EXTI1_IRQHandler, /*!< 7: EXTI Line 1 */
EXTI2_IRQHandler, /*!< 8: EXTI Line 2 */
EXTI3_IRQHandler, /*!< 9: EXTI Line 3 */
EXTI4_IRQHandler, /*!< 10: EXTI Line 4 */
DMA1_Channel1_IRQHandler, /*!< 11: DMA1 Channel 1 */
DMA1_Channel2_IRQHandler, /*!< 12: DMA1 Channel 2 */
DMA1_Channel3_IRQHandler, /*!< 13: DMA1 Channel 3 */
DMA1_Channel4_IRQHandler, /*!< 14: DMA1 Channel 4 */
DMA1_Channel5_IRQHandler, /*!< 15: DMA1 Channel 5 */
DMA1_Channel6_IRQHandler, /*!< 16: DMA1 Channel 6 */
DMA1_Channel7_IRQHandler, /*!< 17: DMA1 Channel 7 */
ADC1_IRQHandler, /*!< 18: ADC1 */
0, /*!< 19: USB High Priority or CAN1 TX */
0, /*!< 20: USB Low Priority or CAN1 RX0 */
0, /*!< 21: CAN1 RX1 */
0, /*!< 22: CAN1 SCE */
EXTI9_5_IRQHandler, /*!< 23: EXTI Line 9..5 */
TIM1_BRK_TIM15_IRQHandler, /*!< 24: TIM1 Break and TIM15 */
TIM1_UP_TIM16_IRQHandler, /*!< 25: TIM1 Update and TIM16 */
TIM1_TRG_COM_TIM17_IRQHandler,/*!< 26: TIM1 Trigger and Commutation and TIM17 */
TIM1_CC_IRQHandler, /*!< 27: TIM1 Capture Compare */
TIM2_IRQHandler, /*!< 28: TIM2 */
TIM3_IRQHandler, /*!< 29: TIM3 */
0, /*!< 30: Reserved */
I2C1_EV_IRQHandler, /*!< 31: I2C1 Event */
I2C1_ER_IRQHandler, /*!< 32: I2C1 Error */
0, /*!< 33: Reserved */
0, /*!< 34: Reserved */
SPI1_IRQHandler, /*!< 35: SPI1 */
0, /*!< 36: Reserved */
USART1_IRQHandler, /*!< 37: USART1 */
USART2_IRQHandler, /*!< 38: USART2 */
0, /*!< 39: Reserved */
EXTI15_10_IRQHandler, /*!< 40: EXTI Line 15..10 */
RTCAlarm_IRQHandler, /*!< 41: RTC Alarm through EXTI Line */
CEC_IRQHandler, /*!< 42: HDMI-CEC */
0,0,0,0,0,0, /*!< Reserved */
0,0,0,0,0, /*!< Reserved */
TIM6_DAC_IRQHandler, /*!< 54: TIM6 and DAC underrun */
TIM7_IRQHandler, /*!< 55: TIM7 */
(void *)0xF108F85F /*!< Boot in RAM mode */
};
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
void Default_Reset_Handler(void)
{
/* Initialize data and bss */
unsigned long *pulSrc, *pulDest;
/* Copy the data segment initializers from flash to SRAM */
pulSrc = &_sidata;
for(pulDest = &_sdata; pulDest < &_edata; )
{
*(pulDest++) = *(pulSrc++);
}
/* Zero fill the bss segment. This is done with inline assembly since this
will clear the value of pulDest if it is not kept in a register. */
__asm(" ldr r0, =_sbss\n"
" ldr r1, =_ebss\n"
" mov r2, #0\n"
" .thumb_func\n"
" zero_loop:\n"
" cmp r0, r1\n"
" it lt\n"
" strlt r2, [r0], #4\n"
" blt zero_loop");
/* Setup the microcontroller system. */
SystemInit();
/* Call the application's entry point.*/
main();
}
/**
*@brief Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*/
#pragma weak Reset_Handler = Default_Reset_Handler
#pragma weak NMI_Handler = Default_Handler
#pragma weak HardFault_Handler = Default_Handler
#pragma weak MemManage_Handler = Default_Handler
#pragma weak BusFault_Handler = Default_Handler
#pragma weak UsageFault_Handler = Default_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_TIM15_IRQHandler = Default_Handler
#pragma weak TIM1_UP_TIM16_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_TIM17_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak CEC_IRQHandler = Default_Handler
#pragma weak TIM6_DAC_IRQHandler = Default_Handler
#pragma weak TIM7_IRQHandler = Default_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop,
* preserving the system state for examination by a debugger.
* @param None
* @retval None
*/
static void Default_Handler(void)
{
/* Go into an infinite loop. */
while (1)
{
}
}
/*********************** (C) COPYRIGHT 2011 Coocox ************END OF FILE*****/
CMSIS/Device/ST/STM32F10x/startup/gcc/startup_stm32f10x_md.c
+285
View File
@@ -0,0 +1,285 @@
/**
******************************************************************************
* @file startup_stm32f10x_md.c
* @author Coocox
* @version V1.0
* @date 12/23/2009
* @brief STM32F10x Medium Density Devices Startup code.
* This module performs:
* - Set the initial SP
* - Set the vector table entries with the exceptions ISR address
* - Initialize data and bss
* - Setup the microcontroller system.
* - Call the application's entry point.
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
*/
/*----------Macro definition--------------------------------------------------*/
#define WEAK __attribute__ ((weak))
/*----------Declaration of the default fault handlers-------------------------*/
/* System exception vector handler */
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_2_IRQHandler(void);
void WEAK USB_HP_CAN1_TX_IRQHandler(void);
void WEAK USB_LP_CAN1_RX0_IRQHandler(void);
void WEAK CAN1_RX1_IRQHandler(void);
void WEAK CAN1_SCE_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_IRQHandler(void);
void WEAK TIM1_UP_IRQHandler(void);
void WEAK TIM1_TRG_COM_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK TIM4_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK I2C2_EV_IRQHandler(void);
void WEAK I2C2_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK SPI2_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK USART3_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK USBWakeUp_IRQHandler(void);
/*----------Symbols defined in linker script----------------------------------*/
extern unsigned long _sidata; /*!< Start address for the initialization
values of the .data section. */
extern unsigned long _sdata; /*!< Start address for the .data section */
extern unsigned long _edata; /*!< End address for the .data section */
extern unsigned long _sbss; /*!< Start address for the .bss section */
extern unsigned long _ebss; /*!< End address for the .bss section */
extern unsigned long _eram; /*!< End address for ram */
/*----------Function prototypes-----------------------------------------------*/
extern int main(void); /*!< The entry point for the application. */
extern void SystemInit(void); /*!< Setup the microcontroller system(CMSIS) */
void Default_Reset_Handler(void); /*!< Default reset handler */
static void Default_Handler(void); /*!< Default exception handler */
/**
*@brief The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x00000000.
*/
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{
/*----------Core Exceptions-------------------------------------------------*/
(void *)&_eram, /*!< The initial stack pointer at end of RAM */
Reset_Handler, /*!< Reset Handler */
NMI_Handler, /*!< NMI Handler */
HardFault_Handler, /*!< Hard Fault Handler */
MemManage_Handler, /*!< MPU Fault Handler */
BusFault_Handler, /*!< Bus Fault Handler */
UsageFault_Handler, /*!< Usage Fault Handler */
0,0,0,0, /*!< Reserved */
SVC_Handler, /*!< SVCall Handler */
DebugMon_Handler, /*!< Debug Monitor Handler */
0, /*!< Reserved */
PendSV_Handler, /*!< PendSV Handler */
SysTick_Handler, /*!< SysTick Handler */
/*----------External Exceptions---------------------------------------------*/
WWDG_IRQHandler, /*!< 0: Window Watchdog */
PVD_IRQHandler, /*!< 1: PVD through EXTI Line detect */
TAMPER_IRQHandler, /*!< 2: Tamper */
RTC_IRQHandler, /*!< 3: RTC */
FLASH_IRQHandler, /*!< 4: Flash */
RCC_IRQHandler, /*!< 5: RCC */
EXTI0_IRQHandler, /*!< 6: EXTI Line 0 */
EXTI1_IRQHandler, /*!< 7: EXTI Line 1 */
EXTI2_IRQHandler, /*!< 8: EXTI Line 2 */
EXTI3_IRQHandler, /*!< 9: EXTI Line 3 */
EXTI4_IRQHandler, /*!< 10: EXTI Line 4 */
DMA1_Channel1_IRQHandler, /*!< 11: DMA1 Channel 1 */
DMA1_Channel2_IRQHandler, /*!< 12: DMA1 Channel 2 */
DMA1_Channel3_IRQHandler, /*!< 13: DMA1 Channel 3 */
DMA1_Channel4_IRQHandler, /*!< 14: DMA1 Channel 4 */
DMA1_Channel5_IRQHandler, /*!< 15: DMA1 Channel 5 */
DMA1_Channel6_IRQHandler, /*!< 16: DMA1 Channel 6 */
DMA1_Channel7_IRQHandler, /*!< 17: DMA1 Channel 7 */
ADC1_2_IRQHandler, /*!< 18: ADC1 & ADC2 */
USB_HP_CAN1_TX_IRQHandler, /*!< 19: USB High Priority or CAN1 TX */
USB_LP_CAN1_RX0_IRQHandler, /*!< 20: USB Low Priority or CAN1 RX0 */
CAN1_RX1_IRQHandler, /*!< 21: CAN1 RX1 */
CAN1_SCE_IRQHandler, /*!< 22: CAN1 SCE */
EXTI9_5_IRQHandler, /*!< 23: EXTI Line 9..5 */
TIM1_BRK_IRQHandler, /*!< 24: TIM1 Break */
TIM1_UP_IRQHandler, /*!< 25: TIM1 Update */
TIM1_TRG_COM_IRQHandler, /*!< 26: TIM1 Trigger and Commutation */
TIM1_CC_IRQHandler, /*!< 27: TIM1 Capture Compare */
TIM2_IRQHandler, /*!< 28: TIM2 */
TIM3_IRQHandler, /*!< 29: TIM3 */
TIM4_IRQHandler, /*!< 30: TIM4 */
I2C1_EV_IRQHandler, /*!< 31: I2C1 Event */
I2C1_ER_IRQHandler, /*!< 32: I2C1 Error */
I2C2_EV_IRQHandler, /*!< 33: I2C2 Event */
I2C2_ER_IRQHandler, /*!< 34: I2C2 Error */
SPI1_IRQHandler, /*!< 35: SPI1 */
SPI2_IRQHandler, /*!< 36: SPI2 */
USART1_IRQHandler, /*!< 37: USART1 */
USART2_IRQHandler, /*!< 38: USART2 */
USART3_IRQHandler, /*!< 39: USART3 */
EXTI15_10_IRQHandler, /*!< 40: EXTI Line 15..10 */
RTCAlarm_IRQHandler, /*!< 41: RTC Alarm through EXTI Line */
USBWakeUp_IRQHandler, /*!< 42: USB Wakeup from suspend */
0,0,0,0,0,0,0, /*!< Reserved */
(void *)0xF108F85F /*!< Boot in RAM mode */
};
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
void Default_Reset_Handler(void)
{
/* Initialize data and bss */
unsigned long *pulSrc, *pulDest;
/* Copy the data segment initializers from flash to SRAM */
pulSrc = &_sidata;
for(pulDest = &_sdata; pulDest < &_edata; )
{
*(pulDest++) = *(pulSrc++);
}
/* Zero fill the bss segment. This is done with inline assembly since this
will clear the value of pulDest if it is not kept in a register. */
__asm(" ldr r0, =_sbss\n"
" ldr r1, =_ebss\n"
" mov r2, #0\n"
" .thumb_func\n"
"zero_loop:\n"
" cmp r0, r1\n"
" it lt\n"
" strlt r2, [r0], #4\n"
" blt zero_loop");
/* Setup the microcontroller system. */
SystemInit();
/* Call the application's entry point.*/
main();
}
/**
*@brief Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*/
#pragma weak Reset_Handler = Default_Reset_Handler
#pragma weak NMI_Handler = Default_Handler
#pragma weak HardFault_Handler = Default_Handler
#pragma weak MemManage_Handler = Default_Handler
#pragma weak BusFault_Handler = Default_Handler
#pragma weak UsageFault_Handler = Default_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_2_IRQHandler = Default_Handler
#pragma weak USB_HP_CAN1_TX_IRQHandler = Default_Handler
#pragma weak USB_LP_CAN1_RX0_IRQHandler = Default_Handler
#pragma weak CAN1_RX1_IRQHandler = Default_Handler
#pragma weak CAN1_SCE_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_IRQHandler = Default_Handler
#pragma weak TIM1_UP_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak TIM4_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak I2C2_EV_IRQHandler = Default_Handler
#pragma weak I2C2_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak SPI2_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak USART3_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak USBWakeUp_IRQHandler = Default_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop,
* preserving the system state for examination by a debugger.
* @param None
* @retval None
*/
static void Default_Handler(void)
{
/* Go into an infinite loop. */
while (1)
{
}
}
/*********************** (C) COPYRIGHT 2009 Coocox ************END OF FILE*****/
CMSIS/Device/ST/STM32F10x/startup/gcc/startup_stm32f10x_md_vl.c
+282
View File
@@ -0,0 +1,282 @@
/**
******************************************************************************
* @file startup_stm32f10x_md_vl.c
* @author Coocox
* @version V1.0
* @date 3/4/2011
* @brief STM32F10x Medium Density Value Line Devices Startup code.
* This module performs:
* - Set the initial SP
* - Set the vector table entries with the exceptions ISR address
* - Initialize data and bss
* - Setup the microcontroller system.
* - Call the application's entry point.
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
*/
/*----------Macro definition--------------------------------------------------*/
#define WEAK __attribute__ ((weak))
/*----------Declaration of the default fault handlers-------------------------*/
/* System exception vector handler */
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_TIM15_IRQHandler(void);
void WEAK TIM1_UP_TIM16_IRQHandler(void);
void WEAK TIM1_TRG_COM_TIM17_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK TIM4_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK I2C2_EV_IRQHandler(void);
void WEAK I2C2_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK SPI2_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK USART3_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK CEC_IRQHandler(void);
void WEAK TIM6_DAC_IRQHandler(void);
void WEAK TIM7_IRQHandler(void);
/*----------Symbols defined in linker script----------------------------------*/
extern unsigned long _sidata; /*!< Start address for the initialization
values of the .data section. */
extern unsigned long _sdata; /*!< Start address for the .data section */
extern unsigned long _edata; /*!< End address for the .data section */
extern unsigned long _sbss; /*!< Start address for the .bss section */
extern unsigned long _ebss; /*!< End address for the .bss section */
extern unsigned long _eram; /*!< End address for ram */
/*----------Function prototypes-----------------------------------------------*/
extern int main(void); /*!< The entry point for the application. */
extern void SystemInit(void); /*!< Setup the microcontroller system(CMSIS) */
void Default_Reset_Handler(void); /*!< Default reset handler */
static void Default_Handler(void); /*!< Default exception handler */
/**
*@brief The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x00000000.
*/
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{
/*----------Core Exceptions-------------------------------------------------*/
(void *)&_eram, /*!< The initial stack pointer at end of RAM */
Reset_Handler, /*!< Reset Handler */
NMI_Handler, /*!< NMI Handler */
HardFault_Handler, /*!< Hard Fault Handler */
MemManage_Handler, /*!< MPU Fault Handler */
BusFault_Handler, /*!< Bus Fault Handler */
UsageFault_Handler, /*!< Usage Fault Handler */
0,0,0,0, /*!< Reserved */
SVC_Handler, /*!< SVCall Handler */
DebugMon_Handler, /*!< Debug Monitor Handler */
0, /*!< Reserved */
PendSV_Handler, /*!< PendSV Handler */
SysTick_Handler, /*!< SysTick Handler */
/*----------External Exceptions---------------------------------------------*/
WWDG_IRQHandler, /*!< 0: Window Watchdog */
PVD_IRQHandler, /*!< 1: PVD through EXTI Line detect */
TAMPER_IRQHandler, /*!< 2: Tamper */
RTC_IRQHandler, /*!< 3: RTC */
FLASH_IRQHandler, /*!< 4: Flash */
RCC_IRQHandler, /*!< 5: RCC */
EXTI0_IRQHandler, /*!< 6: EXTI Line 0 */
EXTI1_IRQHandler, /*!< 7: EXTI Line 1 */
EXTI2_IRQHandler, /*!< 8: EXTI Line 2 */
EXTI3_IRQHandler, /*!< 9: EXTI Line 3 */
EXTI4_IRQHandler, /*!< 10: EXTI Line 4 */
DMA1_Channel1_IRQHandler, /*!< 11: DMA1 Channel 1 */
DMA1_Channel2_IRQHandler, /*!< 12: DMA1 Channel 2 */
DMA1_Channel3_IRQHandler, /*!< 13: DMA1 Channel 3 */
DMA1_Channel4_IRQHandler, /*!< 14: DMA1 Channel 4 */
DMA1_Channel5_IRQHandler, /*!< 15: DMA1 Channel 5 */
DMA1_Channel6_IRQHandler, /*!< 16: DMA1 Channel 6 */
DMA1_Channel7_IRQHandler, /*!< 17: DMA1 Channel 7 */
ADC1_IRQHandler, /*!< 18: ADC1 */
0, /*!< 19: USB High Priority or CAN1 TX */
0, /*!< 20: USB Low Priority or CAN1 RX0 */
0, /*!< 21: CAN1 RX1 */
0, /*!< 22: CAN1 SCE */
EXTI9_5_IRQHandler, /*!< 23: EXTI Line 9..5 */
TIM1_BRK_TIM15_IRQHandler, /*!< 24: TIM1 Break and TIM15 */
TIM1_UP_TIM16_IRQHandler, /*!< 25: TIM1 Update and TIM16 */
TIM1_TRG_COM_TIM17_IRQHandler,/*!< 26: TIM1 Trigger and Commutation and TIM17 */
TIM1_CC_IRQHandler, /*!< 27: TIM1 Capture Compare */
TIM2_IRQHandler, /*!< 28: TIM2 */
TIM3_IRQHandler, /*!< 29: TIM3 */
TIM4_IRQHandler, /*!< 30: TIM4 */
I2C1_EV_IRQHandler, /*!< 31: I2C1 Event */
I2C1_ER_IRQHandler, /*!< 32: I2C1 Error */
I2C2_EV_IRQHandler, /*!< 33: I2C2 Event */
I2C2_ER_IRQHandler, /*!< 34: I2C2 Error */
SPI1_IRQHandler, /*!< 35: SPI1 */
SPI2_IRQHandler, /*!< 36: SPI2 */
USART1_IRQHandler, /*!< 37: USART1 */
USART2_IRQHandler, /*!< 38: USART2 */
USART3_IRQHandler, /*!< 39: USART3 */
EXTI15_10_IRQHandler, /*!< 40: EXTI Line 15..10 */
RTCAlarm_IRQHandler, /*!< 41: RTC Alarm through EXTI Line */
CEC_IRQHandler, /*!< 42: HDMI-CEC */
0,0,0,0,0,0, /*!< Reserved */
0,0,0,0,0, /*!< Reserved */
TIM6_DAC_IRQHandler, /*!< 54: TIM6 and DAC underrun */
TIM7_IRQHandler, /*!< 55: TIM7 */
(void *)0xF108F85F /*!< Boot in RAM mode */
};
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
void Default_Reset_Handler(void)
{
/* Initialize data and bss */
unsigned long *pulSrc, *pulDest;
/* Copy the data segment initializers from flash to SRAM */
pulSrc = &_sidata;
for(pulDest = &_sdata; pulDest < &_edata; )
{
*(pulDest++) = *(pulSrc++);
}
/* Zero fill the bss segment. This is done with inline assembly since this
will clear the value of pulDest if it is not kept in a register. */
__asm(" ldr r0, =_sbss\n"
" ldr r1, =_ebss\n"
" mov r2, #0\n"
" .thumb_func\n"
" zero_loop:\n"
" cmp r0, r1\n"
" it lt\n"
" strlt r2, [r0], #4\n"
" blt zero_loop");
/* Setup the microcontroller system. */
SystemInit();
/* Call the application's entry point.*/
main();
}
/**
*@brief Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*/
#pragma weak Reset_Handler = Default_Reset_Handler
#pragma weak NMI_Handler = Default_Handler
#pragma weak HardFault_Handler = Default_Handler
#pragma weak MemManage_Handler = Default_Handler
#pragma weak BusFault_Handler = Default_Handler
#pragma weak UsageFault_Handler = Default_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_TIM15_IRQHandler = Default_Handler
#pragma weak TIM1_UP_TIM16_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_TIM17_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak TIM4_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak I2C2_EV_IRQHandler = Default_Handler
#pragma weak I2C2_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak SPI2_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak USART3_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak CEC_IRQHandler = Default_Handler
#pragma weak TIM6_DAC_IRQHandler = Default_Handler
#pragma weak TIM7_IRQHandler = Default_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop,
* preserving the system state for examination by a debugger.
* @param None
* @retval None
*/
static void Default_Handler(void)
{
/* Go into an infinite loop. */
while (1)
{
}
}
/*********************** (C) COPYRIGHT 2011 Coocox ************END OF FILE*****/
CMSIS/Device/ST/STM32F10x/startup/gcc/startup_stm32f10x_xl.c
+336
View File
@@ -0,0 +1,336 @@
/**
******************************************************************************
* @file startup_stm32f10x_xl.c
* @author Coocox
* @version V1.0
* @date 3/8/2011
* @brief STM32F10x XL-Density Devices Startup code.
* This module performs:
* - Set the initial SP
* - Set the vector table entries with the exceptions ISR address
* - Initialize data and bss
* - Setup the microcontroller system.
* - Call the application's entry point.
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
*/
/*----------Macro definition--------------------------------------------------*/
#define WEAK __attribute__ ((weak))
/*----------Declaration of the default fault handlers-------------------------*/
/* System exception vector handler */
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_2_IRQHandler(void);
void WEAK USB_HP_CAN1_TX_IRQHandler(void);
void WEAK USB_LP_CAN1_RX0_IRQHandler(void);
void WEAK CAN1_RX1_IRQHandler(void);
void WEAK CAN1_SCE_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_TIM9_IRQHandler(void);
void WEAK TIM1_UP_TIM10_IRQHandler(void);
void WEAK TIM1_TRG_COM_TIM11_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK TIM4_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK I2C2_EV_IRQHandler(void);
void WEAK I2C2_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK SPI2_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK USART3_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK USBWakeUp_IRQHandler(void);
void WEAK TIM8_BRK_TIM12_IRQHandler(void);
void WEAK TIM8_UP_TIM13_IRQHandler(void);
void WEAK TIM8_TRG_COM_TIM14_IRQHandler(void);
void WEAK TIM8_CC_IRQHandler(void);
void WEAK ADC3_IRQHandler(void);
void WEAK FSMC_IRQHandler(void);
void WEAK SDIO_IRQHandler(void);
void WEAK TIM5_IRQHandler(void);
void WEAK SPI3_IRQHandler(void);
void WEAK UART4_IRQHandler(void);
void WEAK UART5_IRQHandler(void);
void WEAK TIM6_IRQHandler(void);
void WEAK TIM7_IRQHandler(void);
void WEAK DMA2_Channel1_IRQHandler(void);
void WEAK DMA2_Channel2_IRQHandler(void);
void WEAK DMA2_Channel3_IRQHandler(void);
void WEAK DMA2_Channel4_5_IRQHandler(void);
/*----------Symbols defined in linker script----------------------------------*/
extern unsigned long _sidata; /*!< Start address for the initialization
values of the .data section. */
extern unsigned long _sdata; /*!< Start address for the .data section */
extern unsigned long _edata; /*!< End address for the .data section */
extern unsigned long _sbss; /*!< Start address for the .bss section */
extern unsigned long _ebss; /*!< End address for the .bss section */
extern unsigned long _eram; /*!< End address for ram */
/*----------Function prototypes-----------------------------------------------*/
extern int main(void); /*!< The entry point for the application. */
extern void SystemInit(void); /*!< Setup the microcontroller system(CMSIS) */
void Default_Reset_Handler(void); /*!< Default reset handler */
static void Default_Handler(void); /*!< Default exception handler */
/**
*@brief The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x00000000.
*/
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{
/*----------Core Exceptions-------------------------------------------------*/
(void *)&_eram, /*!< The initial stack pointer at end of RAM */
Reset_Handler, /*!< Reset Handler */
NMI_Handler, /*!< NMI Handler */
HardFault_Handler, /*!< Hard Fault Handler */
MemManage_Handler, /*!< MPU Fault Handler */
BusFault_Handler, /*!< Bus Fault Handler */
UsageFault_Handler, /*!< Usage Fault Handler */
0,0,0,0, /*!< Reserved */
SVC_Handler, /*!< SVCall Handler */
DebugMon_Handler, /*!< Debug Monitor Handler */
0, /*!< Reserved */
PendSV_Handler, /*!< PendSV Handler */
SysTick_Handler, /*!< SysTick Handler */
/*----------External Exceptions---------------------------------------------*/
WWDG_IRQHandler, /*!< 0: Window Watchdog */
PVD_IRQHandler, /*!< 1: PVD through EXTI Line detect */
TAMPER_IRQHandler, /*!< 2: Tamper */
RTC_IRQHandler, /*!< 3: RTC */
FLASH_IRQHandler, /*!< 4: Flash */
RCC_IRQHandler, /*!< 5: RCC */
EXTI0_IRQHandler, /*!< 6: EXTI Line 0 */
EXTI1_IRQHandler, /*!< 7: EXTI Line 1 */
EXTI2_IRQHandler, /*!< 8: EXTI Line 2 */
EXTI3_IRQHandler, /*!< 9: EXTI Line 3 */
EXTI4_IRQHandler, /*!< 10: EXTI Line 4 */
DMA1_Channel1_IRQHandler, /*!< 11: DMA1 Channel 1 */
DMA1_Channel2_IRQHandler, /*!< 12: DMA1 Channel 2 */
DMA1_Channel3_IRQHandler, /*!< 13: DMA1 Channel 3 */
DMA1_Channel4_IRQHandler, /*!< 14: DMA1 Channel 4 */
DMA1_Channel5_IRQHandler, /*!< 15: DMA1 Channel 5 */
DMA1_Channel6_IRQHandler, /*!< 16: DMA1 Channel 6 */
DMA1_Channel7_IRQHandler, /*!< 17: DMA1 Channel 7 */
ADC1_2_IRQHandler, /*!< 18: ADC1 & ADC2 */
USB_HP_CAN1_TX_IRQHandler, /*!< 19: USB High Priority or CAN1 TX */
USB_LP_CAN1_RX0_IRQHandler, /*!< 20: USB Low Priority or CAN1 RX0 */
CAN1_RX1_IRQHandler, /*!< 21: CAN1 RX1 */
CAN1_SCE_IRQHandler, /*!< 22: CAN1 SCE */
EXTI9_5_IRQHandler, /*!< 23: EXTI Line 9..5 */
TIM1_BRK_TIM9_IRQHandler, /*!< 24: TIM1 Break and TIM9 */
TIM1_UP_TIM10_IRQHandler, /*!< 25: TIM1 Update and TIM10 */
TIM1_TRG_COM_TIM11_IRQHandler,/*!< 26: TIM1 Trigger and Commutation and TIM11 */
TIM1_CC_IRQHandler, /*!< 27: TIM1 Capture Compare */
TIM2_IRQHandler, /*!< 28: TIM2 */
TIM3_IRQHandler, /*!< 29: TIM3 */
TIM4_IRQHandler, /*!< 30: TIM4 */
I2C1_EV_IRQHandler, /*!< 31: I2C1 Event */
I2C1_ER_IRQHandler, /*!< 32: I2C1 Error */
I2C2_EV_IRQHandler, /*!< 33: I2C2 Event */
I2C2_ER_IRQHandler, /*!< 34: I2C2 Error */
SPI1_IRQHandler, /*!< 35: SPI1 */
SPI2_IRQHandler, /*!< 36: SPI2 */
USART1_IRQHandler, /*!< 37: USART1 */
USART2_IRQHandler, /*!< 38: USART2 */
USART3_IRQHandler, /*!< 39: USART3 */
EXTI15_10_IRQHandler, /*!< 40: EXTI Line 15..10 */
RTCAlarm_IRQHandler, /*!< 41: RTC Alarm through EXTI Line */
USBWakeUp_IRQHandler, /*!< 42: USB Wakeup from suspend */
TIM8_BRK_TIM12_IRQHandler, /*!< 43: TIM8 Break and TIM12 */
TIM8_UP_TIM13_IRQHandler, /*!< 44: TIM8 Update and TIM13 */
TIM8_TRG_COM_TIM14_IRQHandler,/*!< 45: TIM8 Trigger and Commutation and TIM14 */
TIM8_CC_IRQHandler, /*!< 46: TIM8 Capture Compare */
ADC3_IRQHandler, /*!< 47: ADC3 */
FSMC_IRQHandler, /*!< 48: FSMC */
SDIO_IRQHandler, /*!< 49: SDIO */
TIM5_IRQHandler, /*!< 50: TIM5 */
SPI3_IRQHandler, /*!< 51: SPI3 */
UART4_IRQHandler, /*!< 52: UART4 */
UART5_IRQHandler, /*!< 53: UART5 */
TIM6_IRQHandler, /*!< 54: TIM6 */
TIM7_IRQHandler, /*!< 55: TIM7 */
DMA2_Channel1_IRQHandler, /*!< 56: DMA2 Channel1 */
DMA2_Channel2_IRQHandler, /*!< 57: DMA2 Channel2 */
DMA2_Channel3_IRQHandler, /*!< 58: DMA2 Channel3 */
DMA2_Channel4_5_IRQHandler, /*!< 59: DMA2 Channel4 & Channel5 */
(void *)0xF108F85F /*!< Boot in RAM mode */
};
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
void Default_Reset_Handler(void)
{
/* Initialize data and bss */
unsigned long *pulSrc, *pulDest;
/* Copy the data segment initializers from flash to SRAM */
pulSrc = &_sidata;
for(pulDest = &_sdata; pulDest < &_edata; )
{
*(pulDest++) = *(pulSrc++);
}
/* Zero fill the bss segment. This is done with inline assembly since this
will clear the value of pulDest if it is not kept in a register. */
__asm(" ldr r0, =_sbss\n"
" ldr r1, =_ebss\n"
" mov r2, #0\n"
" .thumb_func\n"
"zero_loop:\n"
" cmp r0, r1\n"
" it lt\n"
" strlt r2, [r0], #4\n"
" blt zero_loop");
/* Setup the microcontroller system. */
SystemInit();
/* Call the application's entry point.*/
main();
}
/**
*@brief Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*/
#pragma weak Reset_Handler = Default_Reset_Handler
#pragma weak NMI_Handler = Default_Handler
#pragma weak HardFault_Handler = Default_Handler
#pragma weak MemManage_Handler = Default_Handler
#pragma weak BusFault_Handler = Default_Handler
#pragma weak UsageFault_Handler = Default_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_2_IRQHandler = Default_Handler
#pragma weak USB_HP_CAN1_TX_IRQHandler = Default_Handler
#pragma weak USB_LP_CAN1_RX0_IRQHandler = Default_Handler
#pragma weak CAN1_RX1_IRQHandler = Default_Handler
#pragma weak CAN1_SCE_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_TIM9_IRQHandler = Default_Handler
#pragma weak TIM1_UP_TIM10_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_TIM11_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak TIM4_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak I2C2_EV_IRQHandler = Default_Handler
#pragma weak I2C2_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak SPI2_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak USART3_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak USBWakeUp_IRQHandler = Default_Handler
#pragma weak TIM8_BRK_TIM12_IRQHandler = Default_Handler
#pragma weak TIM8_UP_TIM13_IRQHandler = Default_Handler
#pragma weak TIM8_TRG_COM_TIM14_IRQHandler = Default_Handler
#pragma weak TIM8_CC_IRQHandler = Default_Handler
#pragma weak ADC3_IRQHandler = Default_Handler
#pragma weak FSMC_IRQHandler = Default_Handler
#pragma weak SDIO_IRQHandler = Default_Handler
#pragma weak TIM5_IRQHandler = Default_Handler
#pragma weak SPI3_IRQHandler = Default_Handler
#pragma weak UART4_IRQHandler = Default_Handler
#pragma weak UART5_IRQHandler = Default_Handler
#pragma weak TIM6_IRQHandler = Default_Handler
#pragma weak TIM7_IRQHandler = Default_Handler
#pragma weak DMA2_Channel1_IRQHandler = Default_Handler
#pragma weak DMA2_Channel2_IRQHandler = Default_Handler
#pragma weak DMA2_Channel3_IRQHandler = Default_Handler
#pragma weak DMA2_Channel4_5_IRQHandler = Default_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop,
* preserving the system state for examination by a debugger.
* @param None
* @retval None
*/
static void Default_Handler(void)
{
/* Go into an infinite loop. */
while (1)
{
}
}
/*********************** (C) COPYRIGHT 2011 Coocox ************END OF FILE*****/
CMSIS/Device/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s
+468
View File
@@ -0,0 +1,468 @@
/**
******************************************************************************
* @file startup_stm32f10x_cl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Connectivity line Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR
* address.
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word CAN1_TX_IRQHandler
.word CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_IRQHandler
.word TIM1_UP_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word OTG_FS_WKUP_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word UART5_IRQHandler
.word TIM6_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_IRQHandler
.word DMA2_Channel5_IRQHandler
.word ETH_IRQHandler
.word ETH_WKUP_IRQHandler
.word CAN2_TX_IRQHandler
.word CAN2_RX0_IRQHandler
.word CAN2_RX1_IRQHandler
.word CAN2_SCE_IRQHandler
.word OTG_FS_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
STM32F10x Connectivity line Devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak OTG_FS_WKUP_IRQHandler
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_IRQHandler
.thumb_set TIM6_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_IRQHandler
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak CAN2_TX_IRQHandler
.thumb_set CAN2_TX_IRQHandler,Default_Handler
.weak CAN2_RX0_IRQHandler
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
.weak CAN2_RX1_IRQHandler
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
.weak CAN2_SCE_IRQHandler
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler ,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s
+465
View File
@@ -0,0 +1,465 @@
/**
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word USB_HP_CAN1_TX_IRQHandler
.word USB_LP_CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_IRQHandler
.word TIM1_UP_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word USBWakeUp_IRQHandler
.word TIM8_BRK_IRQHandler
.word TIM8_UP_IRQHandler
.word TIM8_TRG_COM_IRQHandler
.word TIM8_CC_IRQHandler
.word ADC3_IRQHandler
.word FSMC_IRQHandler
.word SDIO_IRQHandler
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word UART5_IRQHandler
.word TIM6_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_5_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
STM32F10x High Density devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak USB_HP_CAN1_TX_IRQHandler
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
.weak USB_LP_CAN1_RX0_IRQHandler
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
.weak TIM8_BRK_IRQHandler
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
.weak TIM8_UP_IRQHandler
.thumb_set TIM8_UP_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_IRQHandler
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak SDIO_IRQHandler
.thumb_set SDIO_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_IRQHandler
.thumb_set TIM6_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s
+442
View File
@@ -0,0 +1,442 @@
/**
******************************************************************************
* @file startup_stm32f10x_hd_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x High Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM32100E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_TIM17_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word CEC_IRQHandler
.word TIM12_IRQHandler
.word TIM13_IRQHandler
.word TIM14_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word UART5_IRQHandler
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_5_IRQHandler
.word DMA2_Channel5_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
STM32F10x High Density Value line devices. */
/*******************************************************************************
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM17_IRQHandler
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak TIM12_IRQHandler
.thumb_set TIM12_IRQHandler,Default_Handler
.weak TIM13_IRQHandler
.thumb_set TIM13_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s
+343
View File
@@ -0,0 +1,343 @@
/**
******************************************************************************
* @file startup_stm32f10x_ld.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word USB_HP_CAN1_TX_IRQHandler
.word USB_LP_CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_IRQHandler
.word TIM1_UP_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word 0
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word 0
.word 0
.word SPI1_IRQHandler
.word 0
.word USART1_IRQHandler
.word USART2_IRQHandler
.word 0
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word USBWakeUp_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x108. This is for boot in RAM mode for
STM32F10x Low Density devices.*/
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak USB_HP_CAN1_TX_IRQHandler
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
.weak USB_LP_CAN1_RX0_IRQHandler
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld_vl.s
+383
View File
@@ -0,0 +1,383 @@
/**
******************************************************************************
* @file startup_stm32f10x_ld_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Low Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_TIM17_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word 0
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word 0
.word 0
.word SPI1_IRQHandler
.word 0
.word USART1_IRQHandler
.word USART2_IRQHandler
.word 0
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word CEC_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x01CC. This is for boot in RAM mode for
STM32F10x Low Density Value Line devices. */
/*******************************************************************************
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM17_IRQHandler
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s
+358
View File
@@ -0,0 +1,358 @@
/**
******************************************************************************
* @file startup_stm32f10x_md.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word USB_HP_CAN1_TX_IRQHandler
.word USB_LP_CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_IRQHandler
.word TIM1_UP_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word USBWakeUp_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x108. This is for boot in RAM mode for
STM32F10x Medium Density devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak USB_HP_CAN1_TX_IRQHandler
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
.weak USB_LP_CAN1_RX0_IRQHandler
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md_vl.s
+399
View File
@@ -0,0 +1,399 @@
/**
******************************************************************************
* @file startup_stm32f10x_md_vl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x Medium Density Value Line Devices vector table for RIDE7
* toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF108F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_TIM17_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word CEC_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x01CC. This is for boot in RAM mode for
STM32F10x Medium Value Line Density devices. */
/*******************************************************************************
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM17_IRQHandler
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s
+465
View File
@@ -0,0 +1,465 @@
/**
******************************************************************************
* @file startup_stm32f10x_xl.s
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief STM32F10x XL-Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Configure the clock system and the external SRAM mounted on
* STM3210E-EVAL board to be used as data memory (optional,
* to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word USB_HP_CAN1_TX_IRQHandler
.word USB_LP_CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM9_IRQHandler
.word TIM1_UP_TIM10_IRQHandler
.word TIM1_TRG_COM_TIM11_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word USBWakeUp_IRQHandler
.word TIM8_BRK_TIM12_IRQHandler
.word TIM8_UP_TIM13_IRQHandler
.word TIM8_TRG_COM_TIM14_IRQHandler
.word TIM8_CC_IRQHandler
.word ADC3_IRQHandler
.word FSMC_IRQHandler
.word SDIO_IRQHandler
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word UART5_IRQHandler
.word TIM6_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_5_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
STM32F10x XL Density devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak USB_HP_CAN1_TX_IRQHandler
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
.weak USB_LP_CAN1_RX0_IRQHandler
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM9_IRQHandler
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
.weak TIM1_UP_TIM10_IRQHandler
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM11_IRQHandler
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak SDIO_IRQHandler
.thumb_set SDIO_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_IRQHandler
.thumb_set TIM6_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s
+507
View File
@@ -0,0 +1,507 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
;* File Name : startup_stm32f10x_cl.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Connectivity line devices vector table for
;* EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address.
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
DCD CAN1_TX_IRQHandler ; CAN1 TX
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C1 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_IRQHandler ; TIM6
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
DCD ETH_IRQHandler ; Ethernet
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
DCD CAN2_TX_IRQHandler ; CAN2 TX
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
DCD OTG_FS_IRQHandler ; USB OTG FS
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_2_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC1_2_IRQHandler
B ADC1_2_IRQHandler
PUBWEAK CAN1_TX_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_TX_IRQHandler
B CAN1_TX_IRQHandler
PUBWEAK CAN1_RX0_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_RX0_IRQHandler
B CAN1_RX0_IRQHandler
PUBWEAK CAN1_RX1_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_RX1_IRQHandler
B CAN1_RX1_IRQHandler
PUBWEAK CAN1_SCE_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_SCE_IRQHandler
B CAN1_SCE_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_BRK_IRQHandler
B TIM1_BRK_IRQHandler
PUBWEAK TIM1_UP_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_UP_IRQHandler
B TIM1_UP_IRQHandler
PUBWEAK TIM1_TRG_COM_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_TRG_COM_IRQHandler
B TIM1_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM4_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM4_IRQHandler
B TIM4_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK I2C2_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_EV_IRQHandler
B I2C2_EV_IRQHandler
PUBWEAK I2C2_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_ER_IRQHandler
B I2C2_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_IRQHandler
SECTION .text:CODE:REORDER(1)
USART3_IRQHandler
B USART3_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTCAlarm_IRQHandler
SECTION .text:CODE:REORDER(1)
RTCAlarm_IRQHandler
B RTCAlarm_IRQHandler
PUBWEAK OTG_FS_WKUP_IRQHandler
SECTION .text:CODE:REORDER(1)
OTG_FS_WKUP_IRQHandler
B OTG_FS_WKUP_IRQHandler
PUBWEAK TIM5_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM5_IRQHandler
B TIM5_IRQHandler
PUBWEAK SPI3_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI3_IRQHandler
B SPI3_IRQHandler
PUBWEAK UART4_IRQHandler
SECTION .text:CODE:REORDER(1)
UART4_IRQHandler
B UART4_IRQHandler
PUBWEAK UART5_IRQHandler
SECTION .text:CODE:REORDER(1)
UART5_IRQHandler
B UART5_IRQHandler
PUBWEAK TIM6_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM6_IRQHandler
B TIM6_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK DMA2_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel1_IRQHandler
B DMA2_Channel1_IRQHandler
PUBWEAK DMA2_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel2_IRQHandler
B DMA2_Channel2_IRQHandler
PUBWEAK DMA2_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel3_IRQHandler
B DMA2_Channel3_IRQHandler
PUBWEAK DMA2_Channel4_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel4_IRQHandler
B DMA2_Channel4_IRQHandler
PUBWEAK DMA2_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel5_IRQHandler
B DMA2_Channel5_IRQHandler
PUBWEAK ETH_IRQHandler
SECTION .text:CODE:REORDER(1)
ETH_IRQHandler
B ETH_IRQHandler
PUBWEAK ETH_WKUP_IRQHandler
SECTION .text:CODE:REORDER(1)
ETH_WKUP_IRQHandler
B ETH_WKUP_IRQHandler
PUBWEAK CAN2_TX_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN2_TX_IRQHandler
B CAN2_TX_IRQHandler
PUBWEAK CAN2_RX0_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN2_RX0_IRQHandler
B CAN2_RX0_IRQHandler
PUBWEAK CAN2_RX1_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN2_RX1_IRQHandler
B CAN2_RX1_IRQHandler
PUBWEAK CAN2_SCE_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN2_SCE_IRQHandler
B CAN2_SCE_IRQHandler
PUBWEAK OTG_FS_IRQHandler
SECTION .text:CODE:REORDER(1)
OTG_FS_IRQHandler
B OTG_FS_IRQHandler
END
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s
+496
View File
@@ -0,0 +1,496 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system and the external SRAM
;* mounted on STM3210E-EVAL board to be used as data
;* memory (optional, to be enabled by user)
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR address,
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
DCD TIM8_BRK_IRQHandler ; TIM8 Break
DCD TIM8_UP_IRQHandler ; TIM8 Update
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
DCD ADC3_IRQHandler ; ADC3
DCD FSMC_IRQHandler ; FSMC
DCD SDIO_IRQHandler ; SDIO
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_IRQHandler ; TIM6
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_2_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC1_2_IRQHandler
B ADC1_2_IRQHandler
PUBWEAK USB_HP_CAN1_TX_IRQHandler
SECTION .text:CODE:REORDER(1)
USB_HP_CAN1_TX_IRQHandler
B USB_HP_CAN1_TX_IRQHandler
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
SECTION .text:CODE:REORDER(1)
USB_LP_CAN1_RX0_IRQHandler
B USB_LP_CAN1_RX0_IRQHandler
PUBWEAK CAN1_RX1_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_RX1_IRQHandler
B CAN1_RX1_IRQHandler
PUBWEAK CAN1_SCE_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_SCE_IRQHandler
B CAN1_SCE_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_BRK_IRQHandler
B TIM1_BRK_IRQHandler
PUBWEAK TIM1_UP_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_UP_IRQHandler
B TIM1_UP_IRQHandler
PUBWEAK TIM1_TRG_COM_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_TRG_COM_IRQHandler
B TIM1_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM4_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM4_IRQHandler
B TIM4_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK I2C2_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_EV_IRQHandler
B I2C2_EV_IRQHandler
PUBWEAK I2C2_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_ER_IRQHandler
B I2C2_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_IRQHandler
SECTION .text:CODE:REORDER(1)
USART3_IRQHandler
B USART3_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTCAlarm_IRQHandler
SECTION .text:CODE:REORDER(1)
RTCAlarm_IRQHandler
B RTCAlarm_IRQHandler
PUBWEAK USBWakeUp_IRQHandler
SECTION .text:CODE:REORDER(1)
USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
PUBWEAK TIM8_BRK_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_BRK_IRQHandler
B TIM8_BRK_IRQHandler
PUBWEAK TIM8_UP_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_UP_IRQHandler
B TIM8_UP_IRQHandler
PUBWEAK TIM8_TRG_COM_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_TRG_COM_IRQHandler
B TIM8_TRG_COM_IRQHandler
PUBWEAK TIM8_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_CC_IRQHandler
B TIM8_CC_IRQHandler
PUBWEAK ADC3_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC3_IRQHandler
B ADC3_IRQHandler
PUBWEAK FSMC_IRQHandler
SECTION .text:CODE:REORDER(1)
FSMC_IRQHandler
B FSMC_IRQHandler
PUBWEAK SDIO_IRQHandler
SECTION .text:CODE:REORDER(1)
SDIO_IRQHandler
B SDIO_IRQHandler
PUBWEAK TIM5_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM5_IRQHandler
B TIM5_IRQHandler
PUBWEAK SPI3_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI3_IRQHandler
B SPI3_IRQHandler
PUBWEAK UART4_IRQHandler
SECTION .text:CODE:REORDER(1)
UART4_IRQHandler
B UART4_IRQHandler
PUBWEAK UART5_IRQHandler
SECTION .text:CODE:REORDER(1)
UART5_IRQHandler
B UART5_IRQHandler
PUBWEAK TIM6_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM6_IRQHandler
B TIM6_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK DMA2_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel1_IRQHandler
B DMA2_Channel1_IRQHandler
PUBWEAK DMA2_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel2_IRQHandler
B DMA2_Channel2_IRQHandler
PUBWEAK DMA2_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel3_IRQHandler
B DMA2_Channel3_IRQHandler
PUBWEAK DMA2_Channel4_5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel4_5_IRQHandler
B DMA2_Channel4_5_IRQHandler
END
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/iar/startup_stm32f10x_hd_vl.s
+461
View File
@@ -0,0 +1,461 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd_vl.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x High Density Value Line Devices vector table
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system and the external SRAM
;* mounted on STM32100E-EVAL board to be used as data
;* memory (optional, to be enabled by user)
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address.
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_IRQHandler ; ADC1
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD CEC_IRQHandler ; HDMI-CEC
DCD TIM12_IRQHandler ; TIM12
DCD TIM13_IRQHandler ; TIM13
DCD TIM14_IRQHandler ; TIM14
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC1_IRQHandler
B ADC1_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_TIM15_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_BRK_TIM15_IRQHandler
B TIM1_BRK_TIM15_IRQHandler
PUBWEAK TIM1_UP_TIM16_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_UP_TIM16_IRQHandler
B TIM1_UP_TIM16_IRQHandler
PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_TRG_COM_TIM17_IRQHandler
B TIM1_TRG_COM_TIM17_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM4_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM4_IRQHandler
B TIM4_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK I2C2_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_EV_IRQHandler
B I2C2_EV_IRQHandler
PUBWEAK I2C2_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_ER_IRQHandler
B I2C2_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_IRQHandler
SECTION .text:CODE:REORDER(1)
USART3_IRQHandler
B USART3_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTCAlarm_IRQHandler
SECTION .text:CODE:REORDER(1)
RTCAlarm_IRQHandler
B RTCAlarm_IRQHandler
PUBWEAK CEC_IRQHandler
SECTION .text:CODE:REORDER(1)
CEC_IRQHandler
B CEC_IRQHandler
PUBWEAK TIM12_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM12_IRQHandler
B TIM12_IRQHandler
PUBWEAK TIM13_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM13_IRQHandler
B TIM13_IRQHandler
PUBWEAK TIM14_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM14_IRQHandler
B TIM14_IRQHandler
PUBWEAK TIM5_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM5_IRQHandler
B TIM5_IRQHandler
PUBWEAK SPI3_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI3_IRQHandler
B SPI3_IRQHandler
PUBWEAK UART4_IRQHandler
SECTION .text:CODE:REORDER(1)
UART4_IRQHandler
B UART4_IRQHandler
PUBWEAK UART5_IRQHandler
SECTION .text:CODE:REORDER(1)
UART5_IRQHandler
B UART5_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK DMA2_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel1_IRQHandler
B DMA2_Channel1_IRQHandler
PUBWEAK DMA2_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel2_IRQHandler
B DMA2_Channel2_IRQHandler
PUBWEAK DMA2_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel3_IRQHandler
B DMA2_Channel3_IRQHandler
PUBWEAK DMA2_Channel4_5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel4_5_IRQHandler
B DMA2_Channel4_5_IRQHandler
PUBWEAK DMA2_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel5_IRQHandler
B DMA2_Channel5_IRQHandler
END
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s
+366
View File
@@ -0,0 +1,366 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address.
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD 0 ; Reserved
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_2_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC1_2_IRQHandler
B ADC1_2_IRQHandler
PUBWEAK USB_HP_CAN1_TX_IRQHandler
SECTION .text:CODE:REORDER(1)
USB_HP_CAN1_TX_IRQHandler
B USB_HP_CAN1_TX_IRQHandler
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
SECTION .text:CODE:REORDER(1)
USB_LP_CAN1_RX0_IRQHandler
B USB_LP_CAN1_RX0_IRQHandler
PUBWEAK CAN1_RX1_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_RX1_IRQHandler
B CAN1_RX1_IRQHandler
PUBWEAK CAN1_SCE_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_SCE_IRQHandler
B CAN1_SCE_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_BRK_IRQHandler
B TIM1_BRK_IRQHandler
PUBWEAK TIM1_UP_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_UP_IRQHandler
B TIM1_UP_IRQHandler
PUBWEAK TIM1_TRG_COM_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_TRG_COM_IRQHandler
B TIM1_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTCAlarm_IRQHandler
SECTION .text:CODE:REORDER(1)
RTCAlarm_IRQHandler
B RTCAlarm_IRQHandler
PUBWEAK USBWakeUp_IRQHandler
SECTION .text:CODE:REORDER(1)
USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
END
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s
+369
View File
@@ -0,0 +1,369 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_ld_vl.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Low Density Value Line Devices vector table
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address.
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_IRQHandler ; ADC1
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD 0 ; Reserved
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SPI1_IRQHandler ; SPI1
DCD 0 ; Reserved
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD 0 ; Reserved
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD CEC_IRQHandler ; HDMI-CEC
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
DCD TIM7_IRQHandler ; TIM7
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC1_IRQHandler
B ADC1_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_TIM15_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_BRK_TIM15_IRQHandler
B TIM1_BRK_TIM15_IRQHandler
PUBWEAK TIM1_UP_TIM16_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_UP_TIM16_IRQHandler
B TIM1_UP_TIM16_IRQHandler
PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_TRG_COM_TIM17_IRQHandler
B TIM1_TRG_COM_TIM17_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTCAlarm_IRQHandler
SECTION .text:CODE:REORDER(1)
RTCAlarm_IRQHandler
B RTCAlarm_IRQHandler
PUBWEAK CEC_IRQHandler
SECTION .text:CODE:REORDER(1)
CEC_IRQHandler
B CEC_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
END
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/iar/startup_stm32f10x_md.s
+391
View File
@@ -0,0 +1,391 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Devices vector table for
;* EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address.
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_2_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC1_2_IRQHandler
B ADC1_2_IRQHandler
PUBWEAK USB_HP_CAN1_TX_IRQHandler
SECTION .text:CODE:REORDER(1)
USB_HP_CAN1_TX_IRQHandler
B USB_HP_CAN1_TX_IRQHandler
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
SECTION .text:CODE:REORDER(1)
USB_LP_CAN1_RX0_IRQHandler
B USB_LP_CAN1_RX0_IRQHandler
PUBWEAK CAN1_RX1_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_RX1_IRQHandler
B CAN1_RX1_IRQHandler
PUBWEAK CAN1_SCE_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_SCE_IRQHandler
B CAN1_SCE_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_BRK_IRQHandler
B TIM1_BRK_IRQHandler
PUBWEAK TIM1_UP_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_UP_IRQHandler
B TIM1_UP_IRQHandler
PUBWEAK TIM1_TRG_COM_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_TRG_COM_IRQHandler
B TIM1_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM4_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM4_IRQHandler
B TIM4_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK I2C2_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_EV_IRQHandler
B I2C2_EV_IRQHandler
PUBWEAK I2C2_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_ER_IRQHandler
B I2C2_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_IRQHandler
SECTION .text:CODE:REORDER(1)
USART3_IRQHandler
B USART3_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTCAlarm_IRQHandler
SECTION .text:CODE:REORDER(1)
RTCAlarm_IRQHandler
B RTCAlarm_IRQHandler
PUBWEAK USBWakeUp_IRQHandler
SECTION .text:CODE:REORDER(1)
USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
END
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s
+394
View File
@@ -0,0 +1,394 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_md_vl.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x Medium Density Value Line Devices vector table
;* for EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address.
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_IRQHandler ; ADC1
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD CEC_IRQHandler ; HDMI-CEC
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
DCD TIM7_IRQHandler ; TIM7
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC1_IRQHandler
B ADC1_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_TIM15_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_BRK_TIM15_IRQHandler
B TIM1_BRK_TIM15_IRQHandler
PUBWEAK TIM1_UP_TIM16_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_UP_TIM16_IRQHandler
B TIM1_UP_TIM16_IRQHandler
PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_TRG_COM_TIM17_IRQHandler
B TIM1_TRG_COM_TIM17_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM4_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM4_IRQHandler
B TIM4_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK I2C2_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_EV_IRQHandler
B I2C2_EV_IRQHandler
PUBWEAK I2C2_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_ER_IRQHandler
B I2C2_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_IRQHandler
SECTION .text:CODE:REORDER(1)
USART3_IRQHandler
B USART3_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTCAlarm_IRQHandler
SECTION .text:CODE:REORDER(1)
RTCAlarm_IRQHandler
B RTCAlarm_IRQHandler
PUBWEAK CEC_IRQHandler
SECTION .text:CODE:REORDER(1)
CEC_IRQHandler
B CEC_IRQHandler
PUBWEAK TIM6_DAC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM6_DAC_IRQHandler
B TIM6_DAC_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
END
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s
+496
View File
@@ -0,0 +1,496 @@
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
;* File Name : startup_stm32f10x_xl.s
;* Author : MCD Application Team
;* Version : V3.5.0
;* Date : 11-March-2011
;* Description : STM32F10x XL-Density Devices vector table for EWARM
;* toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system and the external SRAM
;* mounted on STM3210E-EVAL board to be used as data
;* memory (optional, to be enabled by user)
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR address,
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
DCD ADC3_IRQHandler ; ADC3
DCD FSMC_IRQHandler ; FSMC
DCD SDIO_IRQHandler ; SDIO
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_IRQHandler ; TIM6
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_2_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC1_2_IRQHandler
B ADC1_2_IRQHandler
PUBWEAK USB_HP_CAN1_TX_IRQHandler
SECTION .text:CODE:REORDER(1)
USB_HP_CAN1_TX_IRQHandler
B USB_HP_CAN1_TX_IRQHandler
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
SECTION .text:CODE:REORDER(1)
USB_LP_CAN1_RX0_IRQHandler
B USB_LP_CAN1_RX0_IRQHandler
PUBWEAK CAN1_RX1_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_RX1_IRQHandler
B CAN1_RX1_IRQHandler
PUBWEAK CAN1_SCE_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_SCE_IRQHandler
B CAN1_SCE_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_TIM9_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_BRK_TIM9_IRQHandler
B TIM1_BRK_TIM9_IRQHandler
PUBWEAK TIM1_UP_TIM10_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_UP_TIM10_IRQHandler
B TIM1_UP_TIM10_IRQHandler
PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_TRG_COM_TIM11_IRQHandler
B TIM1_TRG_COM_TIM11_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM4_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM4_IRQHandler
B TIM4_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK I2C2_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_EV_IRQHandler
B I2C2_EV_IRQHandler
PUBWEAK I2C2_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_ER_IRQHandler
B I2C2_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_IRQHandler
SECTION .text:CODE:REORDER(1)
USART3_IRQHandler
B USART3_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTCAlarm_IRQHandler
SECTION .text:CODE:REORDER(1)
RTCAlarm_IRQHandler
B RTCAlarm_IRQHandler
PUBWEAK USBWakeUp_IRQHandler
SECTION .text:CODE:REORDER(1)
USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
PUBWEAK TIM8_BRK_TIM12_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_BRK_TIM12_IRQHandler
B TIM8_BRK_TIM12_IRQHandler
PUBWEAK TIM8_UP_TIM13_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_UP_TIM13_IRQHandler
B TIM8_UP_TIM13_IRQHandler
PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_TRG_COM_TIM14_IRQHandler
B TIM8_TRG_COM_TIM14_IRQHandler
PUBWEAK TIM8_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_CC_IRQHandler
B TIM8_CC_IRQHandler
PUBWEAK ADC3_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC3_IRQHandler
B ADC3_IRQHandler
PUBWEAK FSMC_IRQHandler
SECTION .text:CODE:REORDER(1)
FSMC_IRQHandler
B FSMC_IRQHandler
PUBWEAK SDIO_IRQHandler
SECTION .text:CODE:REORDER(1)
SDIO_IRQHandler
B SDIO_IRQHandler
PUBWEAK TIM5_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM5_IRQHandler
B TIM5_IRQHandler
PUBWEAK SPI3_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI3_IRQHandler
B SPI3_IRQHandler
PUBWEAK UART4_IRQHandler
SECTION .text:CODE:REORDER(1)
UART4_IRQHandler
B UART4_IRQHandler
PUBWEAK UART5_IRQHandler
SECTION .text:CODE:REORDER(1)
UART5_IRQHandler
B UART5_IRQHandler
PUBWEAK TIM6_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM6_IRQHandler
B TIM6_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK DMA2_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel1_IRQHandler
B DMA2_Channel1_IRQHandler
PUBWEAK DMA2_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel2_IRQHandler
B DMA2_Channel2_IRQHandler
PUBWEAK DMA2_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel3_IRQHandler
B DMA2_Channel3_IRQHandler
PUBWEAK DMA2_Channel4_5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel4_5_IRQHandler
B DMA2_Channel4_5_IRQHandler
END
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
CMSIS/Device/ST/STM32F10x/system_stm32f10x.c
+466
View File
@@ -0,0 +1,466 @@
/**
******************************************************************************
* @file system_stm32f10x.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
*
* 1. This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
* factors, AHB/APBx prescalers and Flash settings).
* This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32f10x_xx.s" file.
*
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
* by the user application to setup the SysTick
* timer or configure other parameters.
*
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
* be called whenever the core clock is changed
* during program execution.
*
* 2. After each device reset the HSI (8 MHz) is used as system clock source.
* Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
* configure the system clock before to branch to main program.
*
* 3. If the system clock source selected by user fails to startup, the SystemInit()
* function will do nothing and HSI still used as system clock source. User can
* add some code to deal with this issue inside the SetSysClock() function.
*
* 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
* the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file.
* When HSE is used as system clock source, directly or through PLL, and you
* are using different crystal you have to adapt the HSE value to your own
* configuration.
*
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f10x_system
* @{
*/
/** @addtogroup STM32F10x_System_Private_Includes
* @{
*/
#include "stm32f10x.h"
/**
* @}
*/
/** @addtogroup STM32F10x_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F10x_System_Private_Defines
* @{
*/
/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
frequency (after reset the HSI is used as SYSCLK source)
IMPORTANT NOTE:
==============
1. After each device reset the HSI is used as System clock source.
2. Please make sure that the selected System clock doesn't exceed your device's
maximum frequency.
3. If none of the define below is enabled, the HSI is used as System clock
source.
4. The System clock configuration functions provided within this file assume that:
- For Low, Medium and High density Value line devices an external 8MHz
crystal is used to drive the System clock.
- For Low, Medium and High density devices an external 8MHz crystal is
used to drive the System clock.
- For Connectivity line devices an external 25MHz crystal is used to drive
the System clock.
If you are using different crystal you have to adapt those functions accordingly.
*/
#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
/* #define SYSCLK_FREQ_HSE HSE_VALUE */
#define SYSCLK_FREQ_8MHz 8000000
#else
/* #define SYSCLK_FREQ_HSE HSE_VALUE */
/* #define SYSCLK_FREQ_24MHz 24000000 */
/* #define SYSCLK_FREQ_36MHz 36000000 */
/* #define SYSCLK_FREQ_48MHz 48000000 */
/* #define SYSCLK_FREQ_56MHz 56000000 */
#define SYSCLK_FREQ_72MHz 72000000
#endif
/*!< Uncomment the following line if you need to use external SRAM mounted
on STM3210E-EVAL board (STM32 High density and XL-density devices) or on
STM32100E-EVAL board (STM32 High-density value line devices) as data memory */
#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
/* #define DATA_IN_ExtSRAM */
#endif
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
/**
* @}
*/
/** @addtogroup STM32F10x_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F10x_System_Private_Variables
* @{
*/
/*******************************************************************************
* Clock Definitions
*******************************************************************************/
#ifdef SYSCLK_FREQ_HSE
uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_8MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_8MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_36MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_48MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_56MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_72MHz
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */
#else /*!< HSI Selected as System Clock source */
uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */
#endif
__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
/**
* @}
*/
/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
* @{
*/
#ifdef DATA_IN_ExtSRAM
static void SystemInit_ExtMemCtl(void);
#endif /* DATA_IN_ExtSRAM */
/**
* @}
*/
/** @addtogroup STM32F10x_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system
* Initialize the Embedded Flash Interface, the PLL and update the
* SystemCoreClock variable.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
void SystemInit (void)
{
/* Reset the RCC clock configuration to the default reset state(for debug purpose) */
/* Set HSION bit */
RCC->CR |= (uint32_t)0x00000001;
/* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
#ifndef STM32F10X_CL
RCC->CFGR &= (uint32_t)0xF8FF0000;
#else
RCC->CFGR &= (uint32_t)0xF0FF0000;
#endif /* STM32F10X_CL */
/* Reset HSEON, CSSON and PLLON bits */
RCC->CR &= (uint32_t)0xFEF6FFFF;
/* Reset HSEBYP bit */
RCC->CR &= (uint32_t)0xFFFBFFFF;
/* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
RCC->CFGR &= (uint32_t)0xFF80FFFF;
#ifdef STM32F10X_CL
/* Reset PLL2ON and PLL3ON bits */
RCC->CR &= (uint32_t)0xEBFFFFFF;
/* Disable all interrupts and clear pending bits */
RCC->CIR = 0x00FF0000;
/* Reset CFGR2 register */
RCC->CFGR2 = 0x00000000;
#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
/* Disable all interrupts and clear pending bits */
RCC->CIR = 0x009F0000;
/* Reset CFGR2 register */
RCC->CFGR2 = 0x00000000;
#else
/* Disable all interrupts and clear pending bits */
RCC->CIR = 0x009F0000;
#endif /* STM32F10X_CL */
#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
#ifdef DATA_IN_ExtSRAM
SystemInit_ExtMemCtl();
#endif /* DATA_IN_ExtSRAM */
#endif
/* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
/* Configure the Flash Latency cycles and enable prefetch buffer */
//SetSysClock();
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
#endif
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
* or HSI_VALUE(*) multiplied by the PLL factors.
*
* (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
* 8 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
* 8 MHz or 25 MHz, depedning on the product used), user has to ensure
* that HSE_VALUE is same as the real frequency of the crystal used.
* Otherwise, this function may have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
* @param None
* @retval None
*/
void SystemCoreClockUpdate (void)
{
uint32_t tmp = 0, pllmull = 0, pllsource = 0;
#ifdef STM32F10X_CL
uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
#endif /* STM32F10X_CL */
#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
uint32_t prediv1factor = 0;
#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
/* Get SYSCLK source -------------------------------------------------------*/
tmp = RCC->CFGR & RCC_CFGR_SWS;
switch (tmp)
{
case 0x00: /* HSI used as system clock */
SystemCoreClock = HSI_VALUE;
break;
case 0x04: /* HSE used as system clock */
SystemCoreClock = HSE_VALUE;
break;
case 0x08: /* PLL used as system clock */
/* Get PLL clock source and multiplication factor ----------------------*/
pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
#ifndef STM32F10X_CL
pllmull = ( pllmull >> 18) + 2;
if (pllsource == 0x00)
{
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
}
else
{
#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
/* HSE oscillator clock selected as PREDIV1 clock entry */
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
#else
/* HSE selected as PLL clock entry */
if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
{/* HSE oscillator clock divided by 2 */
SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
}
else
{
SystemCoreClock = HSE_VALUE * pllmull;
}
#endif
}
#else
pllmull = pllmull >> 18;
if (pllmull != 0x0D)
{
pllmull += 2;
}
else
{ /* PLL multiplication factor = PLL input clock * 6.5 */
pllmull = 13 / 2;
}
if (pllsource == 0x00)
{
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
}
else
{/* PREDIV1 selected as PLL clock entry */
/* Get PREDIV1 clock source and division factor */
prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
if (prediv1source == 0)
{
/* HSE oscillator clock selected as PREDIV1 clock entry */
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
}
else
{/* PLL2 clock selected as PREDIV1 clock entry */
/* Get PREDIV2 division factor and PLL2 multiplication factor */
prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2;
SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
}
}
#endif /* STM32F10X_CL */
break;
default:
SystemCoreClock = HSI_VALUE;
break;
}
/* Compute HCLK clock frequency ----------------*/
/* Get HCLK prescaler */
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
/* HCLK clock frequency */
SystemCoreClock >>= tmp;
}
/**
* @brief Setup the external memory controller. Called in startup_stm32f10x.s
* before jump to __main
* @param None
* @retval None
*/
#ifdef DATA_IN_ExtSRAM
/**
* @brief Setup the external memory controller.
* Called in startup_stm32f10x_xx.s/.c before jump to main.
* This function configures the external SRAM mounted on STM3210E-EVAL
* board (STM32 High density devices). This SRAM will be used as program
* data memory (including heap and stack).
* @param None
* @retval None
*/
void SystemInit_ExtMemCtl(void)
{
/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
required, then adjust the Register Addresses */
/* Enable FSMC clock */
RCC->AHBENR = 0x00000114;
/* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
RCC->APB2ENR = 0x000001E0;
/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
/*---------------- SRAM Address lines configuration -------------------------*/
/*---------------- NOE and NWE configuration --------------------------------*/
/*---------------- NE3 configuration ----------------------------------------*/
/*---------------- NBL0, NBL1 configuration ---------------------------------*/
GPIOD->CRL = 0x44BB44BB;
GPIOD->CRH = 0xBBBBBBBB;
GPIOE->CRL = 0xB44444BB;
GPIOE->CRH = 0xBBBBBBBB;
GPIOF->CRL = 0x44BBBBBB;
GPIOF->CRH = 0xBBBB4444;
GPIOG->CRL = 0x44BBBBBB;
GPIOG->CRH = 0x44444B44;
/*---------------- FSMC Configuration ---------------------------------------*/
/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
FSMC_Bank1->BTCR[4] = 0x00001011;
FSMC_Bank1->BTCR[5] = 0x00000200;
}
#endif /* DATA_IN_ExtSRAM */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/